T6s F plug (solder)

T6s F solder plugs

Normally ships in 5-7 days
Calculated at checkout
  • Product Description

    Product description:

    ViaBlue ® T6s F connectors are very high-quality high-end F-connector, the contact pins are made of brass. All contact surfaces are 24 karat gold-plated. The plug housing is made of aluminum. There are two versions, one solder and thread design. When the solder can lead wires up to 9.5 mm, for the threaded cable can be mounted up to 8 mm diameter. For assembly the stripped cable ends are soldered at the contact part of the T6s F connector. The contact part can be removed completely from the connector housing. The M4 screw serves as strain relief. With the accompanying Diameter Decreasers that decrease the plug transition regions inner diameter, if necessary, can be cable of 3-9.5 mm diameter fitted with high resistance strain relief all mentioned cable thicknesses. The stripped cable is pushed into the plug inner housing. The conductor is guided through the insulation in the Pin cylinder that twisted folded 360 degree mass is pressed to stop isolation. By screwing down Pin screw and the internal strain relief screw the cable connector is firmly fixed in the inner housing. Finally, the two outer screws are tightened by sliding the aluminum tube. When T6s Screw-cable can be installed by 7-8 mm dia.

    Technical specifications:

    • Description: T6s F connector
    • Maximum outside diameter: 13.5 mm
    • Contact: F-Type Standard
    • ROHS Directive / Regulations: ROHS compliant
    • Finishing: 24K gold plated
    • Overall length: 42.5 mm
    • Packing unit: 4 Pieces
    • Identification: black
    • Screw: 1.5 mm hex


  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Find Similar Products by Category