T6s Antenna connector (screw)

T6s Antenna screw connector

Normally ships in 5-7 days
Calculated at checkout
  • Product Description

    Product description:

    ViaBlue ® T6s antenna connectors are very high-quality high-end antenna connector, the contact pins are made ??????of brass. All contact surfaces are 24 karat gold-plated. The plug housing is made ??????of aluminum. There are two versions, one solder and thread design. When the solder can lead wires up to 9.5 mm, for the threaded cable can be mounted up to 8 mm diameter. For assembly the stripped cable ends are soldered at the contact part of the T6s antenna connector. The contact part can be removed completely from the connector housing. The M4 screw serves as strain relief. With the accompanying Diameter Decreasern that decrease in the plug means transition region the inner diameter, if necessary, the cables can be of 3-9.5 mm diameter fitted with high resistance strain relief for all mentioned cable thicknesses.

    T6s antenna plug screw version:
    the stripped cable is pushed into the plug inner housing. The conductor is guided through the insulation in the Pin cylinder that twisted folded 360 %C2%BA mass is pressed to stop isolation. By screwing down Pin screw and the internal strain relief screw the cable connector is firmly fixed in the inner housing. Finally, the two outer screws are tightened by sliding the aluminum tube. When T6s Screw-cable can be installed by 7-8 mm dia.



    Technical specifications:

    • Description: T6s antenna connector
    • Maximum outside diameter: 13.5 mm
    • Contact: TV male / female standard
    • ROHS Directive / Regulations: ROHS compliant
    • Finishing: 24K gold plated
    • Total length: 41 mm
    • Packing unit: 2 Pairs
    • Identification: black
    • Screw: 1.5 mm hex


  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Find Similar Products by Category