click to view larger image


ETS IP Camera Balun, Female F connector to RJ45 jack


As prices for IP cameras continue to drop and the quality
continues to rise, there is an increase in the number of IP camera
installations in many types of facilities which already have
installed coax. ETS now has a way to utilize the existing coax
by installing a pair of low cost ETS IP Camera Baluns
(EIP-XX Series)…a technology unique to ETS.

Using installed coax with ETS IP Camera Baluns can be used as a
permanent installation solution or as a stop-gap measure until
later upgrades are made. One run of coax cable replaces two pair
UTP with improved NEXT (near-end crosstalk) over the 802.3

Most existing installations for CCTV cameras use 75 ohm RG59 coax or
similar cable.
A variety of configurations are available to meet your specific IP
camera connectivity requirements.

• Low cost speedy installation using legacy cable
• Exceeds 802.3 10BaseT NEXT specification, isolating the receiver
from the transmitted signal
• Passive unit (no power required)
• Run over 200 meters on coax.
• Impedance matched
• Rugged compact case

Any facility wired with legacy cable can add an IP camera to existing
coax installations in:
• Airports
• Banks
• Casinos
• Hotels
• Hospitals
• Schools
• Parking lots
• Residences
• Corporations
ETS EIP-75F-45

There are currently no reviews for this product, be the first add a review and share your thoughts with other customers.

Insertion Loss
<0.5 dB

BNC or F Connector to RJ45 Jack

50? to dual 100? or 75? to dual 100? or 93? to dual 100?

> 30 dB

56mm x 19mm x 21mm
(L x W x H)

Net Weight
0.02 kg (approximate)

Ordering parts#:
Female F Connector to RJ45 jack

Female BNC to RJ45 jack

Male BNC to RJ45 jack

xx = 58, 59, 62 for wiring of 50, 75 or 93 ohm coax, respectively
All Pin-outs: Standard Ethernet pin-outs (1,2 & 3,6)

Share It!