Key Digital KD-X222PO Power over HDBaseT HDMI via Single CAT5e or Cat6 Cable Extension set


Calculated at checkout
  • Product Description

    Power over HDBaseT HDMI via Single CAT5e or Cat6 Cable Extension set with HDR, HDCP2.2, 4K support. 

    KD-X222/KD-X222PO HDBaseT/HDMI (Tx & Rx) Extenders are an HDCP 2.2 compliant product that extend 4K/UHD 24/25/30 (4:4:4) and 4K/UHD 60 (4:2:0) signals up to 150 ft. using Key Digital® KD-CAT6STP1X Super CAT6A Shielded cable, or up to 125 ft. using a single third-party CAT5e/6 cable. 1080p/60, 1920x1200, 3D signals are extended up to 250 ft. via single Key Digital® KD-CAT6STP1X Super CAT6 shielded cable, or up to 230 ft. using a single third-party CAT5e/6 cable. In addition to HDMI video and audio signals, KD-X222/X222PO carries IR or RS-232 for controlling remotely located equipment or the RS-232 port can be used to control the KD-X222/X222PO.

    Key Features:

    • HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
    • KD-X222PO: Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
    • Signal Extension:
      • Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
      • Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6UTP/STP cabling
      • Up to 250 ft. @ 1080p /1920x1200 using KD-CAT6STP1X cabling
      • Up to 230 ft. @ 1080p /1920x1200 using third-party CAT5e/6 cabling
    • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
    • HDR (High Dynamic Range): More life-like images through a greater range of luminance levels
    • 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
    • Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
    • 3D: Support for standard 3D stereoscopic signal formats
    • Low Profile: Super slim chassis design
    • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
    • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
    • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
    • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
    • IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
    • Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
    • RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
    • Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status
    • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
    • CEC Support: For inter-device control between input and output HDMI channel
    • I2C Communication: EDID and HDCP authentication to Display and Source
    • Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control®, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.
    • All Key Digital® products are covered by a Limited 3 Year Product Warranty

    Regulation: CE, RoHS, WEEE
    Enclosure: Black Metal
    Product (Each): 4.1” x 2.8” x 0.875”, Weight: 0.75 lbs
    Power (Tx Only): KD-PS12V2ASC, 12V/2A, 100-240VAC, 50-60Hz, Interchangeable head with screw-in connector

    Accessories: (2) Mounting Brackets, (1) IR Emitter, (1) IR Sensor

  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Customers Who Viewed This Product Also Viewed

  • Find Similar Products by Category