HSW44C+ front


Your Price:
$2,449.90 (You save $1,550.00)
Normally ships in 1-3 days
Calculated at checkout
  • Product Description

    4×4 HDMI Matrix Switch with Cat5 Extension, full 3D support, with IR Pass-through. 

    The HSW44C+ 4×4 HDMI & full 3D support over CAT5 Matrix, with IR Pass-through, provides the most flexible and cost effective solution in the market to route high definition video sources + multi-chanel (up to 7.1-channel) digital audio, from any of the four HDMI sources to the remote displays, at the same time. Through low cost Cat-5/5e/6 LAN cables, not only can high quality video and audio be transmitted to the display sites, but users can also switch among four HDMI sources using the push-in button, Ethernet or remote control. With single power design at the source site, each remote module is easily installed without power supply. The built-in IR extension function allows users at display site access the DVD player, PS3 or any HDMI supported devices, directly.


    • HDMI™ (Deep Color)
    • HDCP compliant
    • Allows any source to be displayed on multiple displays at once
    • Supports 7.1 channel digital audio
    • Matrix master can switch every output channel to any HDMI™input by push button, IR remote control, or RS-232 control
    • Extends video signal up to 165 feet over CAT5e at 720p and 1080i; and 115 feet at 1080p
    • Allows control of main matrix center through control line at remote receiver
    • Allows control of local HDMI™ sources such as DVD and TiVo® by IR extender through control path at remote receiver
    • Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively
    • Supports default HDMI EDID and learns the EDID of displays
    •  State-of-the-art Silicon Image (Founder of H DMI) chipset embedded for utmost compatibility and reliabilit

    • Supports full IR frequency 20kHz – 60kHz

    • Extends video signal up to 35m (115 feet) over CAT5e at 1080p and likely longer with better HDMI source device (such as PS3® ), better grade HDMI display (such as Sony X-series HDTV® ), and better quality solid CAT6 cable
    • Fast response time – 2~5 seconds for channel switch


    Specifications & Package Contents
    HSW44C Plus HSMR Plus

    HDMI compliance: High Speed HDMI-Deep Color & Full 3D support
    HDCP compliance: Yes
    Video bandwidth: Single-link 225MHz [6.75Gbps]
    Video resolution support: 480i / 480p / 720p / 1080i / 1080p60 Hz up to 36-bit color
    Audio support: Surround sound (up to 7.1ch) or stereo digital audio
    HDMI over CAT5 transmission range:
    Full HD (1080p): 35m (115ft) [CAT5e] / 40m (130ft) [CAT6]
    HD (720p/1080i): 50m (165ft) [CAT5e] / 55m (180ft) [CAT6]

    HDMI equalization: N/A 8-level digital rotary control
    Input TMDS signal: 1.2 Volts [peak-to-peak]
    Input DDC signal: 5 Volts [peak-to-peak, TTL]
    ESD protection:
    [1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]
    [2] Core chipset — ±8kV

    PCB stack-up: 4-layer board [impedance control — differential 100Ω; single 50Ω]

    4x HDMI
    1x RS-232
    1xRJ-45 Ethernet Control
    1x RJ-45 TMDS
    1x RJ-45 DDC
    1x IR socket for IR receiver

    4x RJ-45 TMDS
    4x RJ-45 DDC
    5x IR socket for IR blaster
    1x HDMI

    HDMI Input selection Push-in button / IR remote control / RS-232
    Push-in button /
    IR remote control
    HDMI source control: Controllable via IR pass-through from IR receiver at RX to IR blaster at TX
    IR remote control Electro-optical characteristics: = 25° / Carrier frequency: 20~60kHz

    HDMI connector: Type A [19-pin female]
    RJ-45 connector: WE/SS 8P8C with 2 LED indicators for receiver connect & Ethernet
    RS-232 connector: DE-9 [9-pin D-sub female]
    3.5mm connector
    Earphone jack for IR blaster

    [IR Main] IR control on all source devices
    [IR1~IR4] IR control on individual source device
    Earphone jack for IR receiver
    [IR RECEIVER] Receives IR commands from remote control

    DIP switch
    [SW1~SW4] 2-pin for EDID and audio setting modes
    [SW Main] 4-pin operation mode & firmware update

  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Related Products

  • Customers Who Viewed This Product Also Viewed

  • Find Similar Products by Category