Liberty EDU-KIT-001

EDU-KIT-001

×
×
RRP:
$1,599.00
Your Price:
$1,439.10 (You save $159.90)
SKU:
EDU-KIT-001
Condition:
New
Shipping:
Calculated at checkout
Quantity:
  • Product Description

    HDMI and USB Classroom Audio/Video Distribution and Control System

    The Digitalinx EDU-KIT-001 is a multi-function AV distribution system designed to provide HDMI video switching, system control, video extension and analog audio amplification in a convenient kit. Utilizing the Valens Colligo VS2110 series chips, power, control, video up to 1080p, and audio are transported over a single 30m (98 ft) Category 6A cable between the wall plate transmitter and the receiver. The wall plate control module connects to the wall plate transmitter with a second Category 6A cable. All the power needed for the system is provided by the receiver. Additionally, the receiver features a built-in web GUI for control and analog audio de-embedding to a built-in 2x20 watt stereo amplifier.


    Features and Benefits

    Includes wallplate transmitter, wallplate control panel and receiver/processor
    Wallplate transmitter features:
    Two HDMI inputs with automatic or manual switching modes
    USB-B 2.0 High Speed connection for local PC and interactive whiteboard integration
    System uses HDBaseT 2.0 technology circuit for AV and USB2.0 extension
    Single twisted pair for data and power
    Wallplate control panel features:
    System on/off
    Mic and source volume control
    IR learning for controlling connected devices
    Single twisted pair for data and power
    Receiver/processor features:
    Mic/line input
    HDMI output with audio de‐embedding
    IR and RS232 output for display and/or screen control
    2x20w 4 ohm amplifier for speaker integration
    TCP/IP connectivity for system wide monitoring and diagnostics
    USB-A connection for local PC and interactive whiteboard integration
    Hardware for ceiling or wall mounting

     

    Applications

    • K-12, Higher Ed, Conference or Training room solution
    • Extension of two HDMI sources to one HDMI destination
    • Small presentation space with audio reinforcement
    • Ideal for training, education, and meeting installations


    Specifications

    Product Line: EDU-KIT-001

    Receiver

    I/O Connections
    Ethernet One (1) 8P8C port (Shielded RJ45)
    HDBaseT In/PoC Out One (1) 8P8C port (Shielded RJ45)
    HDMI Output One (1) HDMI Type A Receptacle
    USB from Display One (1) USB Type A Receptacle
    IR Output One (1) 3.5mm TRS Jack
    RS232 to Display Only One (1) 3-Pole Removable Terminal Block
    Remote Mute Contact Closures One (1) 2-Pole Removable Terminal Block
    Analog Audio Output, Line Level One (1) 3-Pole Removable Terminal Block
    Mic/Line Switch One (1) Two Position Sliding Microswitch
    Microphone Input One (1) 3-Pole Removable Terminal Block
    Analog Audio Output, Speakers One (1) 4-Pole Removable Terminal Block
    24V DC Power One (1) Threaded Barrel (5.5 mm OD; 2.6 mm ID)
    Firmware (Front Panel) One (1) USB Type B Micro Receptacle
    Receiver Status Indicators
    System Power One (1) Green LED
    HDBaseT Link One (1) Green LED
    HDCP Active One (1) Green LED
    Receiver Power One (1) Red LED

    Transmitter

    I/O Connections
    Source Select Button One (1) Illuminitating Momentary Push Button Switch
    USB to PC One (1) USB Type B Receptacle
    HDMI Inputs Two (2) HDMI Type A Receptacle
    Firmware One (1) USB Type B Micro Receptacle
    Reset Button One (1) Momentary Push Button Switch
    HDBaseT Out/PoC In (Rear) One (1) 8P8C port (Shielded RJ45)
    Power/RS232 (Rear) One (1) 8P8C port (Shielded RJ45)
    Transmitter Status Indicators
    Transmitter Power One (1) Red LED
    HDMI Input 1 Active One (1) Bi-Color LED (Green/Amber)
    HDMI Input 2 Active One (1) Bi-Color LED (Green/Amber)
    HDBaseT Link One (1) Green LED
    HDCP Active One (1) Green LED
    Control Pad I/O Connections
    Volume Knob One (1) Rotary Encoder
    On, Off, HDMI 1, HDMI 2 Buttons Four (4) Illuminitating Momentary Push Button Switches
    IR In One (1) IR Receiver
    Configuration Port One (1) USB Type A Receptacle
    Power/RS232 (Rear) One (1) 8P8C port (Shielded RJ45)
    Firmware (Side) One (1) USB Type A Receptacle
    Control Pad Status Indicators
    Microphone Active One (1) Violet LED
    Source Active One (1) Violet LED
    Active Volume Level Six (6) Violet LEDs
    Receiver HDBaseT Signal Characteristics
    Maximum Distance 30 m (98.4 ft)
    Cable Requirements Solid core Shielded Category 5e or greater with TIA/EIA-568B crimp pattern
    Bandwidth 10.2 Gbps
    HDBaseT Chipset VS2110RX
    Transmitter HDBaseT Signal Characteristics
    Maximum Distance 30 m (98.4 ft)

    Cable Requirements:

    Solid core Shielded Category 5e or greater with TIA/EIA-568B crimp pattern
    Bandwidth 10.2 Gbps
    HDBaseT Chipset VS2110TX
    Receiver to Control Pad Connectivity
    Maximum Distance 30 m (98.4 ft)
    Cable Requirements Solid core shielded Category 5e or greater with TIA/EIA-568B crimp pattern
    Supported Audio, Video, and Control
    Maximum Video Compatibility Deep Color 48/36/30/24 Bit at 1080p
    Video Compliance HDMI 1.4, HDCP 1.4
    HDMI EDID Pass-through from Display
    Embedded Audio Up to PCM 2 channel
    Analog Audio Frequency Response 20Hz-20KHz
    Analog Audio Output Impedance 50 Ω Analog Output; 4/8 Ω Speaker Output
    Maximum Rated Power Output (Audio) 40 Watts
    Maximum Passive HDMI Distance 5 m (16 ft)
    IR Carrier Frequency Range 33-55kHz at 5 volts
    RS232 Baud Rate 2400, 4800, 9600, 14400, 19200, 38400, 56000, 57600, and 115200 baud
    Ethernet 100BaseT
    USB Supports USB 2.0 up to 100 Mbps
    Contact Closure NO and NC for system mute

    Chassis and Environmental
    Enclosure Material Painted aluminum
    Receiver Dimensions (H x W x D) 31 mm x 250 mm x 130 mm (1.22 in x 9.84 in x 5.12 in)
    Transmitter Overall Dimensions (H x W x D) 104.5 mm x 89 mm x 41.5 mm (4.11 in x 3.50 in x 1.61 in)
    Transmitter In-Wall Dimensions (H x W x D) 69 mm x 89 mm x 39.5 mm (2.72 in x 3.50 in x 1.56 in)
    Control Pad Overall Dimensions (H x W x D) 114 mm x 70 mm x 34 mm (4.49 in x 2.76 in x 1.34 in)
    Control Pad In-Wall Dimensions (H x W x D) 71 mm x 50 mm x 31 mm (2.80 in x 1.97 in x 1.22 in)

    Package Dimensions (H x W x D) 70 mm x 420 mm x 300 mm (2.76 in x 16.54 in x 11.81 in)
    Shipping Weight 2.35 kg (5.2 lbs.)

    Operating Temperature (Environment) 0° to +40° C (+32° to +104° F)
    Operating Temperature (Chassis) 31° C (88° F) (S); 38° C (100° F) (R)
    Operating Humidity (Environment) 20% to 90%, Non-condensing
    Storage Temperature (Environment) -10° to +60° C (+14° to +140° F)
    Storage Humidity (Environment) 20% to 90%, Non-condensing
    Power, ESD, and Regulatory
    Maximum Power Consumption 60 watts
    Power Supply Input Voltage 100-240v AC at 50/60 Hz at 1.7 A
    Power Supply Output Rating 24V DC at 2.5 A
    ESD Protection Contact discharge: ±15kV; Air discharge: ±8kV
    Device Regulatory CE, FCC, RoHS
    Power Supply Regulatory CE, RoHS, UL, TUV/GS, FCC, EAC, WEEE, CCC

    Other
    Standard Warranty 2 Years

    Included Items

    Receiver, Transmitter, Control Panel, Locking Power Supply with Power Cable, USB Type A to Type B Cable, 3-pole to DE9 RS232 Cable, IR Emitter, Two Mounting Rails with Screws, Six Wall Box Screws, Three 3-pole Removable Terminal Blocks, One 2-pole Removable Terminal Block, One 4-pole Removable Terminal Block, Wall Plate for Transmitter, Installation Guide
    Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches.

  • Product Reviews

    ×

    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Customers Who Viewed This Product Also Viewed

  • Find Similar Products by Category

×
×