Liberty DL-HD50C HDMI cat5 extender


Your Price:
$153.00 (You save $17.00)
Calculated at checkout
  • Product Description

    HDMI over single Cat5e or Cat6 cable, 50 meter (150') extension set 

    The DigitaLinx DL-HD50C is an HDMI Extender over Single Cat5e/6 with IR up to a distance of 164ft/50m. The DL-HD50C features EDID management, which allows and encourages source and display “handshake” for seamless integration. Deep color video, 1080p High Definition resolution, DTS-HD or Dolby TrueHD audio are supported with this extender.

    In addition, The DL-HD50C is sold as a set with a transmitting unit and receiving unit. The transmitting unit is used to capture the HDMI input with IR and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR control signals. The extender offers the most convenient solution for HDMI extension over a single Cat5e/6 with long distance capability, and is the perfect solution for any application.

    Features and Benefits

    • Simple and cost-effective HDMI over single Cat Extender
    • Uncompressed 1080P/60Hz up to 50 meters over single Cat5e/Cat6a
    • HDMI 1.3b and HDCP compliance
    • Independent HDMI equalization adjustment button.
    • One-way IR pass through
    • Built-in Surge protection: Voltage ± 1kV
    • Compact size for easy installation.
    • HDMI output on TX for local display
    • Power required on TX side only


    • Extension of HDMI/DVI signals
    • Plenum longer distance HDMI/DVI Extension
    • Small space issues where TWP can be run but not HDMI

    Video Bandwidth: Single-link 165Mhz [ 4.95Gbps]
    Video Support: 480i/480p/720p/1080i/1080p@60
    Audio Support: Surround Sound (up to 7.1 ch) or stereo digital audio
    Transmission Range: HD [1080p 24-bit color] – up to 50m [164ft]
    Input TMDS Signal: 3.3 volts
    Input DDC Signal: 5.0 volts/P-P
    ESD Protection: Human Body model:+/- 8 kV (air-gap discharge) +/- 4 kV (contact discharge)
    HDMI connector: Type A 19 pin female
    RJ-45 connector: WE/SS 8P8C
    3.5mm connector: (TX and RX) IR Receiver/IR Blaster

    Chassis and Environmental
    Operating Temperature: 32~104 °F
    Storage Temperature: -4 ~140 °F
    Operating Humidity (Environment): 20~90 % RH (no condensation)

    Power Consumption: 1.5 watts (TX); 1.0 watts (RX)
    Power Supply Output Voltage: (1) 5V1A DC
    Standard Warranty: 2 Years
    Included Items: Installation Guide, Wideband IR Tx/Rx cable, 5V1A DC Power Supply Adaptor

  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Related Products