Ce Labs C5T6 closeup


Your Price:
$159.90 (You save $160.00)
Normally ships in 1-3 days
Calculated at checkout
  • Product Description

    CE Labs C5T6 HD Component video Cat5 Distribution Amp, stereo and digital audio Cat5e distribution hub, six(6) outputs.

    Distribute High Definition Video and Audio to multiple locations over extended distances using economical Cat 5 or Cat 6 cable. Input can be RCA connector (for video and audio) or via Cat5 sent from a remote transmitter.


    • Active amplification ensures high quality transmission
    • Loop output for use of additional CAT5 transmitters
    • Six CAT5 outputs for additional locations
    • Discrete passive IR channel for the use of external IR remote control systems
    • Balanced and unbalanced inputs for maximum versatility



    • The CAT5 T6 (C5T6) has one set of RCA inputs and one set of RCA loop-thru connectors (to go to the next Transmitter or a local monitor) and two RJ-45 jacks CAT5 signal inputs, if both signals are present at same time (RCA and CAT5), the RCA input signal will be selected automatically.

    • If you wish to use the CAT5 input signal, be certain the RCA input cables “are not connected.”

    • The unit allows any Audio/Video source, with Y, Cb, Cr, or Y, Pb, Pr Outputs (Component), to distribute the Audio and Video to distant locations with excellent picture quality. The amplifier also supports digital audio (The digital audio port can be used for composite video if desired.)

    • This unit works in conjunction with the CAT5RX (receiver units), which supports one monitor with component video, right and left audio, and digital audio. The RX has an adjustable equalizer to compensate for signal loss caused by long cables.

    • An optional external IR system can be used with IR jacks.

    • If CAT5 input signal is used, you can loop out that signal via RCA loop out connectors. Cascade UNITS via RCA loop output or via CAT5.

    • Unused RCA connectors do not need to be terminated



    VIDEO (All channels including Component and CAT5)

    Nominal input level: 1 Volt peak to peak

    Gain: 1 Volt into 75 ohms (2 Volts unterminated)

    Input impedance: 75 ohms component in 100 ohms twisted pair input

    Output impedance: 75 ohms loop out 100 ohms twisted pair output

    Isolation port to port: >45 dB

    Isolation out to input: >65 dB

    Return loss: >20dB

    Video Bandwidth: >75 MHz


    Distance: Maximum distance varies between 400 feet to 500 feet depending upon the type of cable used, type of receiver, and video resolution. 3 composite video signals may be substituted on the individual component video inputs (1000 ft. max)



    Analog: Nominal input level: 1 Volt peak to peak

    Gain: Unity (slightly reduced at max. cable length)

    Input impedance: 22K ohm Audio IN 100 ohms twisted pair IN

    Output impedance: 1K ohm on Loop Out 100 ohms twisted pair OUT

    Frequency response: 20 Hz to 100 KHz

    Signal to Noise: 80 dB @ 1 Volt Out

    Digital: Supports standard SPDIF digital audio.

    Unity Gain when terminated into 75 Ohms. (Composite Video is supported on this port.)


    POWER Requirement: External 9 or 10 Volt AC @ 1200 mA with a (2.1mm center) coaxial barrel connector (Power Supply is included)

  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Customers Who Viewed This Product Also Viewed

  • Find Similar Products by Category