Ce Labs AV400COMP


Normally ships in 1-3 days
  • Product Description

    1 In, 4 Out HDTV/Component Audio/Video Distribution Amp

    Distribute your HDTV or Standard Def Audio Video signals from 1 set of inputs to four TV's throughout your Home or Business. 

    The AV400COMP allows any audio/video source with Y, Cb, Cr, or Y, Pb, Pr application outputs (component), to distribute audio and video. The signal ratio is true one to one with no loss from original source to four different locations. These locations must have the same application as your audio/video source.

    The AV400COMP can be looped, cascaded or put in tandem without loss of audio/video signals. Maximum total runs using multiple amplifiers should be limited to 150 feet for optimum performance.


    • Compatible with all HDTV and Standard 
    • Definition Component Video Signals. 
    • Daisey Chain multiple units together for large scale distribution 
    • Extend your Cable runs up to 150 feet 
    • Save on additional A/V Source devices 


    <video:< b="">
    Gain: 2 Volt Unterminated, 1 Volt terminated: 75 ohms +-5%
    Input Impedance: 75 ohms +-5%
    Output Impedance: 75 ohms +-5%
    Video Inseertion Loss: 50Hz to 10MHz<.40dB
    In to Out Isolation: 50Hz to 10MHz 32 dB Port to Port
    Out to In Isolation: 50Hz to 10MHz 60 dB
    Return Loss: 50Hz to 10MHz 20 dB
    Video Bandwidth: >100MHz
    Audio Response: >100kHz

    Gain: Unity
    Input Impedance: 22k ohm
    Output Impedance: 1k ohm
    THD: 0.05% at 1.0 Volts input level
    Frequency Response: 20Hz to 100kHz
    Channel Seperation: 60dB
    Output to Input Isolation: 60 dB
    Signal to Noise: 100 dB re 2 Volts (out)

  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Find Similar Products by Category