Key Digital KD-HD8x8Lite  EXTENDERS
  • Product Description

    8x8 HDBaseT HDMI Matrix Switcher with Cat5e/Cat6 Extension with KD-CATHD250POHRx Receivers. 

    Key Digital® Digital IQ Series™ KD-HD4x4/6x6/8x8Lite are HDBaseT® Lite HDMI Matrix Switchers capable of switching up to 8 HDMI Video Sources/Inputs to up to 8 Independent Zones/Outputs via Single CAT5e/6.


    Advanced HDMI® Features:

    › 3D – Capability to pass 3D stereoscopic signal formats

    › 4K – 4096x2160/24 video resolution support for commercial applications such as Digital Movie Theaters, CAD, Post Production, Graphics, etc.

    › Audio Return Channel (ARC) – Allows audio to be returned from display back to HDMI source for amplification and display


    Key Features:


    • Simultaneously Active: 8 HDBaseT (CAT5e/6 RJ45) and 8 HDMI outputs with fully automatic CAT5e/6 cable equalization. Supports up to 16 TVs (8 mirrored)
    • Compass Control® Inside: Key Digital’s Compass Control® control system is built-in, negating the need for an external master controller (supports up to 33 control ports)
    • HDBaseT: Utilized on CAT5e/6 RJ45 outputs
    • Signal Extension:
    • Up to 210 feet @ 1080p/60, 1080p/24, 1080i, 720p
    • Up to 120 feet @ 4K/Ultra HD with KD-CATHD250POHRx extenders and approved Key Digital CAT5e/6 cabling
    • 3D Ready: Capability to pass 3D stereoscopic signal formats
    • Ultra HD/4K: 4K x 2K video resolution support for Ultra HD capable TVs and commercial applications such as Digital Movie Theaters, CAD, Post Production
    • Audio Return Channel: Allows audio to be returned from a display to an HDMI output, for audio distribution (HDMI outputs only, using 3.5mm I/O port and 3.5mm to PCM cable)
    • Audio Return without ARC: Audio may be returned from a display lacking ARC, by using Key Digital’s KD-IQJump12FM and KD-35MMAIRH jumper cables
    • EDID: Internal library with 15 default EDID configurations for each input, in addition to native EDID data for any Output/Display
    • Full Buffer™ Technology: Full buffering of HDCP and EDID, for seamless switching and viewing of any source/input to any display/output, regardless of multiple output viewing relation
    • TMDS re-clocking: Support for long HDBaseT/CAT5e/6 or HDMI connections and daisy chain configurations
    • Voltage Trigger/Sensors: I/O ports may be used as a voltage trigger/sensor
    • Relay Support: 3.5mm I/O ports may be used as relays to support contact closure/opening, when used with an external relay board
    • Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™
    • Deep Color Support: Up to 12 bits/color Specifications
    • Control Routing: Enables bi-directional IR/RS-232 control signal extension
    • Control: Front panel push buttons and LEDs, Optical IR front/rear,
    • Serial IR, RS-232 with full bi-directional operation
    • Major Control System Support: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Honeywell®, HAI®, Leviton®, etc.






    › Input (Each): 1 HDMI Connector, Type A, 19 Pin Female

    › Output (Each): 1 HDMI Connector, Type A, 19 Pin Female; Single CAT5e/6 on RJ45 connectors

    › Bandwidth: TMDS bandwidth 3.4 Gb/s

    › Control: Front panel push buttons and LEDs; IR sensor front/rear; RS-232 Tx/Rx lines with full bi-directional operation

    › Video/Audio Matrix Switching: Full matrix switching for HDBT/HDMI Video & Audio, DVI Video

    › Deep Color Support: Supports digital video formats in Deep Color Mode up to 12 bits/color with all HDMI and HDCP technologies

    › HDMI® and HDCP Licensing: Fully licensed and compatible with all HDMI and HDCP technologies 

    › Link: Single Link

    › EDID Control: EDID information is assigned to the inputs from the internal EDID library or from a display’s internal EDID data

    › Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS™-HD Master Audio

    › DDC Signal (Data): Input DDC Signal - 5 Volts p-p (TTL)

    › HDMI Video/Audio Signal: Input Video Signal - 1.2 Volts p-p

    › DDC Communication: EDID and HDCP Bi-directional Transparency from Display to Source

    › Wired IR: modulated IR signal input, 0-5V TTL or -10to +10V.

    › Power: KD-HD4x4/6x6/8x8Lite: +6V/11.6A (70W); KD-CATHD250POHRx:+12V/6A (70W)



    › Regulation: CE, RoHS, WEEE

    › Rack Mount: 

    » KD-HD6x6Lite, KD-HD8x8Lite: 2U, Full Rack Width (rack ears included)

    » KD-HD4x4Lite: 1U

    › Enclosure: Black Metal

    › Product Dimensions: 

    » KD-HD6x6Lite / KD-HD8x8Lite: 17.3” x 6.6” x 3.46” 

    » KD-HD4x4Lite: 17.125” x 5.50” x 1.75” 

    › Shipping Dimensions: 

    » KD-HD6x6Lite / KD-HD8x8Lite: 19.7” x 10” x 8” 

    » KD-HD4x4Lite: 20.2” x 8.85” x 6.69” 

    › Product Weight:

    » KD-HD6x6Lite / KD-HD8X8Lite: 6.6 lb.

    » KD-HD4x4Lite: 5.5 lb.

    › Shipping Weight:

    » KD-HD8X8Lite: 16.5 lb.

    » KD-HD6x6Lite: 14.3 lb.

    » KD-HD4x4Lite: 12.1 lb.

  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Related Products

  • Customers Who Viewed This Product Also Viewed

  • Find Similar Products by Category