click to view larger image

HD25FTCL314

KanexPro HD25FTCL314 High-resolution HDMI cables - 25ft

ITEM: HD25FTCL314

 

The KanexPro High Speed HDMI cables with Ethernet are for applications that require high-performance transmission of HDMI digital video and multi-channel audio signals. These cables have active amplification built-in to the cable prevent impedance mismatch, caused by the cable attenuation, dielectric losses and compensation for skin effect over long distances.

For flawless transmission, the output of the cable is placed at the end of the display to amplify full signal transmission with zero signal loss. These cables are fully CL3 certified which surpasses any in-wall code requirement for residential or commercial installations.

  • High Speed HDMI cables with Ethernet
  • 3D and 4Kx2K support (4-times the resolution of 1080p)
  • Compatible with prior versions of HDMI and DVI
  • Data rates up to 10.2 Gbps
  • Support color depths to 48-bits
  • Up to 100 Mbps of bi-directional (full-duplex) bandwidth is accessible over the HDMI Ethernet Channel
  • HDCP compliant
  • No external power required
  • Available in lengths of 25 feet, 50 feet, 75 feet and 100 feet

Note: The 25ft cable does not include the booster chip for equalization since active sync and equalization is built-in to the cable.

 

 




 
There are currently no reviews for this product, be the first add a review and share your thoughts with other customers.
 

 

 

 

 

 

Standards: High speed HDMI cable with Ethernet

Data rates: Up to 10.2 Gbps

Color Depth Support: 30 bit, 36 bit and 48 bits (16 bits per color)

Vertical Frequency: Supports 60Hz & 120Hz DC-coupled inputs and outputs

Regulatory Compliance: RoHs compliant and CL3 rated

Temperature: -40°C to +85°C operating range

Shielding & Protection:

  • Triple-layer shielding for EMI/RFI rejection
  • 24 AWG copper wire construction

Dimensions:

  • HDMI Cable Diameter: 0.37" (9.5mm)
  • HDMI Connector: 0.55" H x 0.8"W x 1.5"L     

Warranty: Full 1-Year parts and labor

 

*NOTICE*

Side labeled "Input" should be connected to the source. Side labeled "Output" should be connected to the sink (display).

 

Quantity:  
$75.00
$45.00

Share It!