click to view larger image

DVIEXT1

KanexPro DVIEXT1 DVI Extender Kit Over Dual CAT 5e/6

ITEM: DVIEXT1

 

The KanexPro DVI Extender is a transmitter and receiver set engineered to send single link DVI-D signals considerably beyond the limits of standard DVI/ HDMI cables. It extends using two inexpensive Cat 5e, 6 or 7 cables up to 164 ft. (50m). The extender transmits digital video and multi-channel audio from DVI equipped source to DVI/ HDMI enabled displays providing full internal HDCP management and EDID protocol.

The KanexPro DVI extender also features built-in auto-sensing function that automatically adjusts the signal level depending on the transmission distance. Ideal for space-challenging applications where distance is an issue, when extending DVI/HDMI signals over Cat 5e/6.

Please note:

To reduce video dropout problems from lightings, ceiling fans and other EMI issues, it is strongly recommended that you terminate shielded CAT5e/CAT6 and use shielded RJ45 connectors with our extender products. "EZ end" connectors are not recommended for use with DVI/HDMI extenders.

  • Transmit & extend high-resolution DVI/ HDMI signals up to 164ft (50m)
  • Supports bandwidth up to 10.2 Gbps
  • Built-in EDID & HDCP internal management
  • HDCP complaint
  • Supports High Speed HDMI Specifications (Deep Color, Lip Sync and HD lossless audio formats)
  • Supports full HD 1080p (1920x1080@60Hz)
  • Computer resolutions up to WUXGA (1920x1200@60Hz)
  • Supports DDC transmission
  • Automatic gain compensation and equalization
  • Front-panel LEDs for link activity
  • Table/ Wall-mountable aluminum enclosure
  • Internal Universal power adaptable (100Volt-240Volt AC, 50/60Hz)
  • Backed by KanexPro's 3-Year full parts & labor warranty

 

NOTE: Do not use Shielded Twisted Pair cable (STP), to avoid significant drop in performance. Pre-terminated CAT6 (UTP) cables are recommended for optimal results.

 

 




 
There are currently no reviews for this product, be the first add a review and share your thoughts with other customers.
 

Transmitter      
       
Input 1 x DVI-D input Output 2 x RJ45
Input Connector  DVI-D connector, female Output Connector 2 x RJ45 per unit for 2 CAT 5/5e/6 or STP(shielded twisted pair)
Video Signal DVI 1.0 (compatible with HDMI 1.3) Video Signal TIA/EIA T 568A or T 568B. Pin configurations for each standard are available in the manual's installation chapter
Digital Audio Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered. Transmittion Mode   Audio/Video sync-transmission
Receiver      
       
Input 2 x RJ45 Output 1 x DVI-D output
Input Connector 2 x RJ45 per unit for 2 CAT 5/5e/6 or STP(shielded twisted pair) Output Connector DVI-D connector, female
Video Signal Supports both termination standards: TIA/EIA T 568A or T 568B. Video Signal DVI 1.0(HDMI 1.3)
Digital Audio Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered Transmittion Mode   Audio/Video sync-transmission
General      
Resolution Range 800x600 - 1920x1200 (Max.) Transmission Distance Maximum distrance 164 feet (50m)
Gain 0dB~10dB @ 100MHz Differential Phasic Erro ±10° @ 135MHz_100M
SNR >70dB@ 100MHz-100M Frequency Respond  20Hz to 20KHz,±1dB 
Return Lost <-30dB@5KHz THD <0.005%@1KHz
Differential Gain  Erro ±3dB @ 135MHz Min. ~Max.Level <0.3V to 1.45Vp-p
Differential Phasic Erro ±10°@ 135MHz-100M Impedance 75 ohms
Temperature -20 ~ +60C  Humidity ≤95%(no frost )
Power Supply 100VAC ~ 240VAC, 50/60Hz Case Dimension W3 x H1 x D3.4 in
Quantity:  
$350.00

Share It!