FEATURES

* QoS Supports Layer 4 Classification
The switch supports not only Layer 2 802.1p
Priority Queue control, but also programmable higher layer
classification and prioritization, which enable enhanced Quality
of Service (QoS) supporting for real time applications based
on information taken from Layer 2 to Layer 4, such as VoIP.

* Port Mirroring Helps Supervisor Monitoring Network
Port Mirroring copies traffic from a specific port to a target port. This mechanism
helps to track network errors or abnormal packets transmission without
interrupting the flow of data.

* Q-in-Q VLAN For Performance & Security
The VLAN feature in the switch
offers the benefits of both security and performance.
VLAN is used to isolate traffic between different users and thus
provides better security. Limiting the broadcast traffic
to within the same VLAN broadcast domain also enhances performance.
VLAN supports enabling advanced techniques such as "802.1 Q-in-Q" to be deployed.

* 802.3ad LACP For Bandwidth Aggregation
The Gigabit ports can be combined together to createa multi-link load-sharing trunk.
Up to 12 Gigabit ports can be set up per trunk for
bandwidth up to 24Gbps; all traffic is aggregated based
on MAC addresses, thus balancing the traffic load. The switch
supports up to 8 trunking groups. Port trunks are useful for
switch-to-switch cascading, providing very high full-duplex speeds.

* 802.1x Access Control Improve Network Security

802.1x feature enables user authentication for each
network access attempt. Port security feature allows you to
limit the numbers of MAC addresses per port in order to control
the numbers of stations for each ports. Static MAC addresses
can be defined for each port to ensure only registered machines
are allowed to access. By enabling both of these features,
you can establish an access mechanism based on user and
machine identities, as well as control the numbers of access stations.

* 802.1d Compatible & 802.1w Rapid Spanning Tree
For mission critical environments with multiple switches
supporting STP, you can configure the switch with a redundant
backup bridge path, so transmission and reception of packets
can be guaranteed in event of any fail-over switch on the network.

* Broadcast/Multicast Storm Control
To limited too many broadcast/multicast packets flooding
in the network, the Broadcast/Multicast Storm Control is
used to restrict excess traffic. Threshold values are
available to control the rate limit for each port. Packets
are discarded if the count exceeds the configured upper threshold.

TECHNICAL SPECIFICATIONS

    * Model:  MGS2824G
    * Standards:  IEEE 802.3 / 802.3ab / 802.3z / 802.3u / 802.3x
    * Connectors / Slots:
      Front Panel
      — 8 10/100/1000Mbps GbE RJ-45 auto MDI/MDI-X (Ports 1 to 8)
      — 16 1000Mbps GbE SFP slots for fiber modules (Ports 9 to 24)
      Rear Panel
      — 1 RS-232 DB-9 Mail Console Port
      [ Setting:  Baud 57600, Data 8, Stop 1, Parity N, Flow NONE ]
    * Add-on Modules (Sold Separately):
      DX-SFP.SX — 1000Base-SX Multi-Mode SFP Duplex-LC, 850nm
      DX-SFP.L10 — 1000Base-LX Single-Mode/10km SFP Duplex-LC, 1310nm
      DX-SFP.L40 — 1000Base-LX Single-Mode/40km SFP Duplex-LC, 1310nm
    * Data Transfer Rate:
      10/100/1000Mbps (auto-negotiation or forced mode) for TP
      1000Mbps for fiber
    * Cable / Max Distance:
      50/125, 62.5/125µm Multi-Mode fiber, 220m
      9/125µm Single-Mode fiber, 10~40km (SFP module dependent)
      Category 5 or up UTP, 100m for 100Base-TX and 1000Base-T
      Category 3 or up UTP, 100m for 10Base-T
    * Duplex Mode:
      Full for 1000Base-SX/LX/T, and
      Full/Half (auto-sense or forced-mode) for 10/100Base-TX
    * MAC Address:  8K MAC addresses
    * Flow Control:
      IEEE 802.3x compliant for Full-duplex
      Back pressure flow control for Half-duplex
    * LEDs:
      Unit — POWER, CPU
      Per Port (TP/SFP) — LINK/ACT
    * Power Requirement:  100~240V AC, 50/60Hz, max 30W consumption
    * Operating Temperature:  0° to 40° C
    * Humidity:  5% to 90%
    * Dimension:
      44 x 442 x 209mm (H x W x D), 19" Rack-mountable with brackets
    * Safety:  FCC Class A, CE Mark Approval, RoHS Compliance