KEY FEATURES:

 • High bandwidth 1000Mbps network speed
 • Supports Full-Duplex mode
 • Supports IEEE 802.3x Full-Duplex Flow Control
 • Supports 64-/32-Bit PCI bus
 • Compliant with PCI 2.2 interface
 • Supports jumbo frame
 • Supports High Level VLAN Filtering function
 • Supports on-board verification of IP headers and TCP/UDP checksum for received data
 • Supports on-board screening of VLAN tagged Ethernet frames
 • Supports Preboot Execution Environment (PXE), Remote Program Load (RPL), and Bootstrap Protocol (BOOTP) via Multi-Boot Agent (MBA)
 • RoHS Compliance

TECHNICAL SPECIFICATIONS

 • Models: AGP5170SC / AGP5170SC10
 • Standards:
   IEEE 802.3z Gigabit Ethernet 1000Base-SX/LX
   IEEE 802.3x Full-Duplex Flow Control
   IEEE 802.1Q VLANs
   IEEE 802.1p Quality of Service (QoS)
   PCI 2.2

 • Bus Architecture: 64-Bit (66MHz) or 32-Bit (33MHz) PCI
 • Connector:    AGP5170SC — Multi-Mode Duplex-SC, 850nm
   AGP5170SC10 — Single-Mode Duplex-SC/10km, 1310nm
 • Data Transfer Rate: 1000Mbps
 • Duplex Mode: Full
 • Cable / Max Distance:    62.5/125, 50/125µm Multi-Mode fiber, up to 220m
   9/125µm Single-Mode fiber, up to 10km
 • LEDs: Link/ACT, FDX
 • Power Requirement: Max 10W, +5VDC@2A
 • Ambient Temperature: 0º to 50° C
 • Humidity: 5% to 90%
 • PCB Dimension: 57.5 x 165mm (H x L)
 • Weigth: 0.07kg
 • Safety: FCC Class A & CE Mark

DEVICE DRIVERS
1. Microsoft Windows
NT4/2000 (32-Bit)
XP/Vista (32-Bit & 64-Bit)
Server 2003 (32-Bit & 64-Bit)
2. Novell NetWare
Server 4.x/5.x/6.x
Client32 & DOSODI
3. NDIS2
4. SCO
OpenServer Release 5
Unixware 7 / Caldera Open Unix 8
5. Sun Solaris 2.6/6/7/8/9/10 for i386/SPARC
6. Linux kernel 2.4.24 & all 2.6.x (i386 & x86_64)

[ Note: Drivers 4, 5, and 6 are provided as is, no Technical Support available! ]