TECHNICAL SPECIFICATIONS
* Model: AEP2100SC / AEP2100ST / AEP2100LSC / AEP2100LST
* Standards: IEEE 802.3u 100Base-TX, IEEE 802.3 10Base-FL/T
* Bus Architecture: 32-Bit PCI
* Connectors:
AEP2100SC/LSC — Multi-Mode Duplex-SC, 850nm & RJ-45
AEP2100ST/LST — Multi-Mode Duplex-ST, 850nm & RJ-45
* Note: Fiber port & TP port CANNOT BE USED SIMULTANEOUSLY,
i.e. use one connector at a time. Best way to switch between them
is to power down your system first, then select the desired connector.
* Data Transfer Rate: 10Mbps for FL, 10/100Mbps (auto-
negotiation) for TX
* Duplex Mode: Full or Half for FL, Full or Half (auto-sense) for TX
* Cable / Max Distance:
50/125, 62.5/125µm Multi-Mode fiber, up to 2km
Category 5 or up UTP cable for 100Mbps, up to 100m
Category 3 or up UTP cable for 10Mbps, up to 100m
* LEDs: Link/ACT, FDX
* Power Requriement: 1A@+5V
* Operating Temperature: 0° to 50° C
* Humidity: 5% to 90%
* PCB Dimension: 63 x 148mm (H x W)
* Bracket:
AEP2100SC/ST — Standard Profile bracket
AEP2100LSC/LST — Low Profile bracket
* EMI Rating: FCC Class A, CE Mark
DEVICE DRIVERS
* Microsoft Windows 95OSR2/98/98SE/ME/NT4.0/2000/XP
* Novell NetWare Server v4.1x/5.x
* Novell NetWare DOS ODI Client
* Linux (no technical support provided)