RAM

DIGI-9636

$399.00



add to cart
Add to Wishlist

DIGI-9636




24 Bit 96 KHz, 36 Channel 3 x ADAT, S/PDIF, ADAT Sync, Digital Audio Multitrack System.

OVERVIEW

Project Hammerfall (DIGI9652) is just another milestone set by RME. No
other digital audio interface card has got so many enthusiastic
users in such a short time.

If you don't need word clock or third ADAT I/O port then now is the
time to get our latest Hammerfall technology for even less money:
Hammerfall Light equals Project Hammerfall, but is sold without
Expansion Board.

The optional Expansion Board turns the Light into a fully equipped
DIGI9652 at any time.

Hammerfall Light also allows to connect further Expansion Boards
(EXB). One internal ADAT input and two internal ADAT outputs allow you
to realize up to 8 analog inputs, 16 analog outputs or even one
TDIF interface directly inside the computer.

* 2 x ADAT digital I/O, based on RME's reliable Bitclock PLL
* 1 x SPDIF digital I/O, based on RME's reliable DIGI96 technology
* 1 x ADAT Sync In (9-pin D-type) for sample accurate transfers
* 1 x Breakout cable for coaxial SPDIF operation
* Zero wait state PCI Busmaster interface with additional burst FIFO
(130 MB/s transfer rate in both directions)
* No drop out problems at high PCI bus load
* New hardware design: 36 mono channels in block mode, organized in 32
bit ASIO double buffers
* ASIO poured in hardware! The result in speed and performance is 0
(zero!)% CPU load when using ALL 36 channels!
* 130 MB/s transfer rate for record and playback results in only 7%
PCI bus load when using all 36 channels
* New Enhanced Zero Latency Monitoring, now operational even with
different sample rates at input and output
* S/MUX poured in hardware: 8 channels 96 kHz/24 bit for record and
playback

...and numerous other features found already in the DIGI96 series
cards - for a price that can't be beaten!

The Hammerfall series offers drivers for Windows 98/ME (MME with multi-
client operation, ASIO 2.0, GSIF), Windows NT and Windows 2000/XP
(full multi-client operation of MME, GSIF and ASIO 2.0), MacOS
(ASIO 2.0) and Linux (ALSA.)

SETTINGS

Just click on the hammer symbol in the systray of the taskbar and the
settings dialog of the DIGI9636 comes up. The clear structured,
easy to understand window plus the unique informative status
windows for input signal, clock mode, sample rate and time code
make your work with Hammerfall Light to a real pleasure. With a
simple mouse click (or a freely configurable key shortcut) you
gain access to the full power of your card.

When working with several digital sources it is not only necessary
that these are all properly locked, they also have to be totally
synchronized. Else drop outs and crackling occurs. RME's exclusive
SyncCheck checks all input signals and displays their actual state.

A display of the time code at the ADAT Sync-In port offers a quick
check of the communication between external device and Hammerfall.

TECHNICAL SPECIFICATIONS AND FEATURES

* Supported sample frequencies: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
* All settings changeable in realtime, all output options even in
playback mode
* Clock modes slave and master
* Special sample buffer avoids noise even in asynchronous Full Duplex
operation
* Enhanced Mixed mode: ADAT® input plus SPDIF input plus all outputs
simultaneous operational
* Automatic and intelligent master/slave clock control
* Unsurpassed Bitclock PLL (audio synchronization) in ADAT® mode
* 8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23
ms, 46 ms, 93 ms, 186 ms
* Byte swap for Mac included in hardware
* Enhanced Zero Latency Monitoring: realtime monitoring in all clock
modes and even at different sample rates
* Comes with DIGICheck: the ultimate measurement, analysis and test tool
* Complete interrupt sharing
* Input 2 x optical (TOSLINK), 1 x coaxial (Phono), internal (CD-
ROM/Sync-In)
* Input format SPDIF, AES/EBU (Consumer, Professional), ADAT® optical
* Output 2 x optical (TOSLINK), coaxial (Phono), internal (Sync-Out)
* Format output SPDIF, AES/EBU (Consumer/Professional), ADAT® optical
UNIQUE TECHNOLOGIES IN HAMMERFALL DSP

AutoSync
Intelligent clock control according to operational mode and
present/desired sample rate.
Bitclock PLL
The most reliable receiver circuit for ADAT optical signal.

Dynamic Bus Utilization
Scalable computer load according to the current usage.

Enhanced ZLM®
Monitoring of the input signal, independent from clock mode and sample rate.

Intelligent Clock Control
Measurement and display of all incoming and used clocks.

Latency Fast Change
Change latency on-the-fly under ASIO, without manual reset or re-boot.

SyncAlign®
Surveillance and sample accurate synchronization of all channels.

SyncCheck®
Comparison and display of all input clock status.

Zero Latency Monitoring (ZLM®)
Automatic monitoring of the input signal with zero latency.

DIGICheck DSP
Professional status and level display at lowest CPU load.





$