HDSP 9652 is the long-awaited successor of the well-known PCI card
Project Hammerfall (DIGI9652). Like the original Hammerfall, HDSP
9652 offers 3 x ADAT optical I/O, ADAT-Sync In, SPDIF I/O and word
clock I/O. On top, there are 2 MIDI I/Os and TotalMix, a DSP-based
real-time mixer/router.

The HDSP 9652's Secure BIOS Technology allows to perform hardware
updates via software/driver without any risk. And thanks to its
unique 'Zero CPU Load' technology Hammerfall DSP guarantees
highest performance and lowest latency on both notebooks and
desktops!

Hammerfall also allows to connect Analog Expansion Boards (AEB). Two
internal ADAT inputs and two internal ADAT outputs allow you to
realize up to 16 analog inputs and 16 analog outputs directly
inside the computer.

3 x ADAT digital I/O, based on RME's reliable Bitclock PLL

1 x SPDIF digital I/O, based on RME's reliable DIGI96 technology

1 x Breakout cable for coaxial SPDIF operation

1 x Word clock I/O (BNC) on included expansion board

1 x ADAT Sync In (9-pin D-type) for sample accurate transfers

2 x MIDI I/O, 32 channels high-speed MIDI via breakout cable

HDSP Meter Bridge: freely scalable level meters, peak- and RMS
calculation directly in hardware

TotalMix: 1456 channel mixer with 40 bit internal resolution

S/MUX poured in hardware: 12 channels 96 kHz/24 bit for record and
playback on ADAT optical

...and numerous other features found already in the Hammerfall series.
And all this for an unbeatable price!

The Hammerfall® DSP System comes with drivers for Windows 98/ME (MME
with multi-client operation, ASIO 2.0, GSIF), Windows 2000/XP
(fully multi-client operation of MME, GSIF and ASIO 2.0 plus ASIO
multi-client), Mac OS 9.x (ASIO 2.0, OMS MIDI) and Mac OS X (Core
Audio, Core MIDI).

TECHNICAL SPECIFICATIONS AND FEATURES

Supported sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable
8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms,
46 ms, 93 ms, 186 ms
ASIO zero CPU load technology: 0 (zero!)% CPU load when using ALL 52 channels!
All settings changeable in realtime
Clock modes slave and master
Automatic and intelligent master/slave clock control
Enhanced Mixed mode: All inputs and outputs simultaneously operational
Unsurpassed Bitclock PLL (audio synchronization) in ADAT® mode
Enhanced Zero Latency Monitoring for latency-free submixes and perfect
ASIO Direct Monitoring
Comes with DIGICheck: the ultimate measurement, analysis and test tool
Input 3 x optical (TOSLINK), 1 x coaxial (Cinch), 2 x MIDI, word clock (BNC)
Input format SPDIF, AES/EBU (Consumer, Professional), ADAT® optical
Output 3 x optical (TOSLINK), coaxial (Cinch), 2 x MIDI, word clock (BNC)
Format output SPDIF, AES/EBU (Consumer/Professional), ADAT® optical

UNIQUE TECHNOLOGIES IN HAMMERFALL DSP

AutoSync
Intelligent clock control according to operational mode and
present/desired sample rate.

Bitclock PLL
The most reliable receiver circuit for ADAT optical signal.

Dynamic Bus Utilization
Scalable computer load according to the current usage.

Enhanced ZLM®
Monitoring of the input signal, independent from clock mode and sample rate.

Intelligent Clock Control
Measurement and display of all incoming and used clocks.

Latency Fast Change
Change latency on-the-fly under ASIO, without manual reset or re-boot.

SyncAlign®
Surveillance and sample accurate synchronization of all channels.

SyncCheck®
Comparison and display of all input clock status.

Zero Latency Monitoring (ZLM®)
Automatic monitoring of the input signal with zero latency.