How it works
The supplied VGA cable connects from the VGA output of your KVM extender and into the input of the VDL-1000. The monitor is attached to the ouput of the VDL-1000. Each color (RGB) has three sets of buttons that will adjust the delay of the color.

Note:  When CAT-5 cable is used for high quality video transmission, usually the Red, Green and Blue signals are each sent down a separate pair (within one 4-pair cable). This may have a significant effect, as signals take a slightly different time to arrive at the receiving end and as a result suffer visible color separation between Red, Green and Blue.

This distortion increases for higher resolution signals and is often called "SKEW" - the effects are removed by adding a short, wide bandwidth delay to the signals that arrive at the monitor first.

Features:

•    Makes extended VGA displays look better
•    Allows video delay of red, green, and blue colors
•    Works on all VGA resolutions
•    Accomodates two VGA simultaneously
•    Installs in seconds

Specifications:

•    Actual Bandwidth: 350 MHz
•    Input Video Signal: 1.2 Volts p-p / Input Sync Signal: 5 Volts p-p (TTL)
•    Horizontal Frequency Range: 15-70 KHz
•    Vertical Frequency Range: 30 - 170 Hz
•    Video In: HD-15 male
•    Video out: HD-15 female
•    Dimensions: 8.5" W x 1.75" H x 4.625" D
•    Shipping Weight: 5 lbs.

Package Includes:

•    Two 6ft VGA cable