CAT5 Video/Audio Balun Wall Plate with RCA Connectors

*Note* This is a single piece to be used to either transmit or receive. Two are required for an installation

The FAT CAT Series devices will convert analog video and analog or digital audio sources for transmission over CAT5 and CAT6 wire. The FAT CAT Series devices will act as a transmitting or receiving unit.

Product Features:

•    Video Distance: 480i/576i = 700', 480P/576P = 500', 720P/1080i = 300'
•    Audio Distance: PCM Digital = 700', Analog Audio = 700'
•    CAT5 STP and UTP compatible
•    Supports the following Video signals: Component Composite RGBHV
      RGB w/ Composite Synch (or RGB with any synch configuration) S-Video
      (with appropriate adapters)
•    Supports the following Audio signals: PCM Digital Audio Dolby Digital™ AC3 bitstream
      DTS™ bitstream Analog Audio (line level)
•    Shielded RJ45 jack
•    Color coded input jacks
•    Included mounting bracket
•    Length =3.875" X W=3" X
•    Height=1.125"
•    Connectors: BNC (KD-CAT5XBNC), RCA (KD-CAT5XRCA, KD-CAT5XRCA1, KD-C5CWP)

Key Benefits:

•    Converts analog video and analog or digital audio signals for transmission over CAT5
      cable for distances up to 1000ft*
•    Can handle virtually any analog video signal and any analog or digital audio signal on
      any port regardless of silk screen label
•    Shielded RJ45 connections
•    Image quality performance up to 1000’ (Good), 500’ (Better), 300’ (Best)
•    Can be configured to ground individual signals to Earth via four DIP switches to help
      reduce artifacts due to grounding issues
•    Each unit can act as either transmitter or receiver

Specifications:

•    Regulation: RoHS
•    50Hz and 60Hz
•    Wall Plate
•    Enclosure: Molded ABS
•    Dimensions: 4.25” x 1.25” x 3.25”
•    Shipping Carton Dimensions: 4.75” x 2” x 3.5”
•    Product Weight: > 1 lbs
•    Shipping Weight: 1 lbs