KD-VP6 Video Processor converts Composite/S-Video/Component Inputs to Component Output

KD-VP6 converts standard definition NTSC 480i, 480p and PAL 576i,
576p analog video sources to component video.
KD-VP6's feature IAS™ Intelligent Auto Sense signal detection and switching,
pushbutton control, status-monitoring LED’s and RS-232 and IR remote control.
KD-VP6 processor is expandable, individually addressable, product is engineered
to meet rigorous Key Digital® design and test criteria to produce crystal-clear, pristine picture quality.

Product Features:

•    Time Base Corrector (TBC)
•    Converts Composite, S-Video and Component video to Component output
•    Accepts Analog, Composite, S-Video Component SD NTSC
     480i, EDTV 480p, PAL 576i and EDTV 576p video formats
•    Offers user controlled de-interlacing available on Component output only
•    IAS™ Intelligent Auto Sense switches to active input
•    Pushbutton control, and the corresponding status LEDs
•    Easy-to-operate IR remote control
•    Wired IR remote control port
•    RS-232 control port, compatible with all control systems
•    Field upgradable firmware [see note 1]
•    Built-in mounting flanges

Video Output Formats

KD-VP6
• Component Video – NTSC 480i, EDTV 480p, PAL 576i, EDTV 576p
   Note: If Input is Progressive, then Output is Progressive

KD-VP8
• Component Video – NTSC 480i, EDTV 480p, PAL 576i, EDTV 576p
   Note: If Input is Progressive, then Output is Progressive
• HDMI – NTSC 480i, EDTV 480p, PAL 576i, EDTV 576p
   Note: Output Format = Input Format
• CAT5, Data (Video) & Control (DDC)– NTSC 480i, EDTV 480p, PAL 576i, EDTV 576p
   Note: Output Format = Input Format

Connectors
• The inputs consist of the following connectors: • 1 RCA: CVBS Composite Video (Yellow) • S-Video • 3 RCA: Y (Green), Pb (Blue), Pr (Red)

KD-VP6
• The outputs consist of the following connectors:
• 3 RCA: Y (Green), Pb (Blue), Pr (Red)

KD-VP8
• The output consists of the following connectors:
• Y (Green), Pb (Blue), Pr (Red)
• HDMI
• CAT5 Data & Control
• RS-232C: Female D-sub 9-pin
• 5-pin DIN power connector for external AC-DC power supply
• 3.5 mm jack for serial, wired IR, Xantech compatible input

Status and Control
• User-selectable input video source:
   Pushbutton control, and corresponding LED’s for status
• User-selectable HDMI or CAT5 Data & Control Output (KD-VP8 Only)
• Progressive (EDTV) or Interlaced (SDTV) output mode LED indicator
• LED indicates Progressive Input Active
• IR remote control:
• Separate front- and rear-panel IR sensors provided
• Wired IR serial connector provided
• RS-232 port:
• Compatible with all control systems: AMX, Crestron, Elan,
   Control4, Xantech etc. Used for Firmware upgrades
• Each unit (up to 99 on the same IR network)
   is individually addressable using the IR remote control

Mechanical
• Operating Temperature Range 0° – 70° C (32° – 158° F)
• No fan noise
• Product Size: 17 x 11x 1.5 inches (excluding mounting flanges)
• Product Weight: 8 lbs. (excluding external power supply)
• Enclosure type: Metal
• Input power: External AC-DC power supply included
    (5 Volt DC @ 5 Amps, 110-240 VAC, 50-60 Hz)