Crimp version of the WBT-0101. It is recommended that the signal contact (maximum 16 AWG) and ground (maximum 14 AWG) conductors first be prepared with a crimp sleeve. Connection is made by fastening the conductors with the supplied Torx™ T6 size set screws. The greatest cable diameter that can be accommodated is 9mm² / 0.354 inches².

Cable diameter: up to 9 mm
Connection technology: crimping (see WBT cable end sleeves)
Conductor cross section (max.): positive conductor: 2.5 mm²
negative conductor: 4 mm²
Identification: red, white or yellow
Strain relief: Torx screw (T.6)

Recommended tool:

•    Torx T.6 wrench WBT-0488(supplied with each end consumer package)
•    Torque screwdriver WBT-0481for professional OEM mounting
•    Crimping pliers WBT-0403,also see crimping set WBT-0411