Four Inputs and One Output
Supports all HDTV modes 480i through 1080p, including 720p and 1080i. Each input consists of six analog channels (Pr/Pb/Y/Left/Right/CV) and one channel of Digital Audio. Analog audio channels are routed using the same high-bandwidth relay switches as the video channels, and can be used to route H & V components (with proper adapter cables) for an RGBHV switch, supports all RGBHV PC modes.

Passive Switching of Analog Signals
The CVS4 passively switches its analog signals using high quality relays designed specifically for switching low level signals such as those used in the audio and component video paths. Relays offer a switching quality like that of physically swapping cables, without the added noise and distortion that is inherent in active switches. This also allows the CVS4 to be used in reverse. The Output can be used as an input and switched to each of four outputs.

•   Break Before Make Switching Logic
•   Fully isolated analog grounds

5.1 Multi-channel Audio Switch
Since there are six available analog channels, the CVS4 can easily be used as a four to one 5.1 multi-channel audio switch. The fully passive design, and full isolation of the digital and analog grounds, makes the CVS4 ideal for switching analog audio signals between SACD and DVD-Audio players.

•   High Quality Gold Clad, Silver-Palladium Relays
•   Gold Plated Connections
•   Toslink and SPDIF Digital Audio

Features Zektor's Exclusive IIR™ Learning
The CVS4 comes with it's own remote control. However if more than one CVS4 is used in one room, the CVS4 features Zektor's exclusive IIR (Intelligent Infra-Red) learning. Zektor's IIR™ learning allows the CVS4 to work with virtually any remote control! All discrete codes are supported as well.

•   Front Panel Control of Switching

Full Featured Remote Control Interface w/IR Jack
A full featured IR command set is available using any remote control, commands are: Power Toggle, Direct Channel Selection of each input, and for better integration with universal remotes with macro capabilities, the discrete commands Power On, and Power Off are also available. The rear panel IR jack allows for reliable, hardwired IR solutions. The IR jack can conveniently receive both modulated and un--modulated IR signals

•   Built in RS-232
•   K.I.S.S.™ (Keep It Simple Serial™)
•   Auto Dimming Display
•   Adjustable Front Panel LED intensities
•   Rack Mountable Metal Enclosure (1RU)

Optional International Power Supply
Available with an international power supply for 90-264VAC, 47-63Hz operation. The international supply comes with adapters for UK, EURO, AUS and USA use.

Video:

Bandwidth @ -0.1db:	70Mhz, all channels
Bandwidth @ -3db:	Greater than 200mhz, all channels
Resolution:	480i - 1080p, All HDTV modes

Digital Audio:

Input	4 Coax (SPDIF), 4 Optical (Toslink)
Outputs:	2 Coax, 1 Optical, (Simultaneous)
Clock Frequencies Optical:	100KHz - 13.2MHz
Coax:	100KHz - 50MHz
Digital Audio Modes:	PCM,DD5.1,DTS,All modes
Coax Input Levels	200mV - 6.0V
Coax Output Level:	500mV nominalnbsp;
Power Requirements:	1W Standby, 2.5W On
Optional International:	90-264VAC, 47-63Hz, 15W
Power Supply:	Wall Mount, 9V @ 500ma, U.L. Listed
Dimensions:	17"W x 6.5"D x 1.75"H
Warranty:	Two years parts & labor