Access up to Four Sources From One or Two Displays
4 Sources + 2 Displays = Greater Integration OptionsGefen’s 4x2 HDMI Switcher routes high definition video in multiple resolutions up to 1080p plus multichannel digital audio from any of four sources. four inputs accommodate the simultaneous connection of up to four high definition video sources, such as satellite systems and HD DVD players. Two outputs send the high definition audio/video signals up to two high definition displays. A digital audio output port is available if you need to direct the audio to an audio receiver. Switching is done via the IR remote that is provided with the unit. This HDMI product supports BOTH Audio and Video signals.
Features:
- Saves money on hardware—no need to purchase multiple high definition displays.Saves space—one high definition display supports multiple sources. Saves time—no need to disconnect and reconnect sources—everything is accessible. Maintains high resolution video— sharp HDTV resolutions up to 1080P are easily achieved. No loss of quality—the integrity of the high definition signal is preserved using high caliber cables that ensure the signal is maintained.Operational flexibility—you can switch at the source, with the IR remote control or your own universal remote.Compatible with all HDMI-equipped, HDCP-enabled HDTV devices.
- Easy to install and simple to operate.
Fully HDCP Compliant
HDCP (high bandwidth digital content protection) is a standard encoded into the video signal to prevent it from being pirated. If a source device is HDCP coded and is connected to a display or projector without the proper decoding mechanism, the picture is relegated to “snow” or in some cases, very low (480P) resolutions of the images. In order to see high resolution digital video with HDCP compliance, both the source, the display and anything in between must be equipped with HDMI connections that can enable HDCP decoding, such as the 4x2 HDMI Switcher.
How it Works
You simply connect all your sources to the Switcher’s inputs. Then connect up to two displays on the output ports. Once the sources, the Switcher and the display(s) are powered and connected, you simply select which source you want to view using the IR remote.
