True ultrawide bandwidth: 400MHz
We've gone out of our way to bring the quality and specifications you'd find on a professional video switch, to the home theater market. And we started with bandwidth. To correctly display sharp images at 1080p60, a switch or distribution amplifier must be able to pass at least the third harmonic of the video signal, and the third harmonics of a 1080p60 can be as high as 280MHz. With a -3db bandwidth of 400MHz, the HDS4x2 effortlessly passes 1080p60 and all it's third harmonics.

A non-blocking matrix switch with 4 inputs and 2 output zones
Each zone consist of three channels. A component video channel, an analog audio channel, and a digital audio channel. The HDS4x2 is a non-blocking matrix switch, any input can be switched to any output. The outputs can be mirrored and be switched synchronously allowing you to use the HDS4x2 as a dual zone distribution amplifier.

•   Easy to use front panel control of switching
•   Front panel audio and video breakaway

A real analog audio section
Analog audio is not an after thought on the HDS4x2, nor is it just another channel of an internal video switch. The HDS4x2's analog audio section has been designed using very low noise, low offset amplifiers, switches, and buffers designed specifically for analog audio. To prevent video and digital noise from leaking into the audio section, the HDS4x2 audio section has its own power supply regulation, which is not shared with the video or digital sections.

•   True digital audio switching
•   D.C. coupled video inputs and outputs
•   D.C. coupled audio inputs and outputs
•   Adjustable mute switch delays
•   Five separate power supply regulators
•   Built in RS-232 with K.I.S.S.™ (Keep It Simple Serial™)
•   Full featured IR interface, includes all discrete codes
•   Presets (User Defined Discrete codes)
•   Opto-isolated hardwired IR Jack
•   Features Zektor's exclusive IIR™ Learning
•   Auto dimming display with adjustable LED intensities
•   Rack mountable metal enclosure (1RU)

Optional international power supply
Available with an international power supply for 90-264VAC, 47-63Hz operation. The international supply comes with adapters for UK, EURO, AUS and USA use.

Video:
Bandwidth:----------------------0Hz-400MHz @ +1/-3dB, all channels
Input Coupling:-----------------D.C. (max. allowable D.C. offset: 1.5V)
Output Coupling:----------------D.C. (D.C. offset less than 40mV)
Resolution:---------------------480i - 1440p, all HDTV modes, includes 1080p24 & 1080p60
Input impedance:----------------75 ohms

Analog Audio:
Frequency Response:-------------0Hz-125KHz @ +0/-3dB
S.N. Ratio:--------------------- >80dB, 0Hz-22KHz unweighted
Input impedance:----------------5K ohms

Digital Audio:
S/PDIF Inputs:------------------4 Coax, 4 Optical (w/ auto conversion)
S/PDIF Outputs:-----------------2 Coax, 2 Optical
Transfer Rates:-----------------Optical: 13.2Mb/S, Coax: 50Mb/S
Digital Audio Modes:------------PCM,DD5.1,DTS,All modes
Coax Input Levels:--------------200mV - 7.0V (PC card compatible)
Coax Output Level:--------------500mV nominal into 75 ohms

Control:
IR Sensor:----------------------Modulation Frequency: 34KHz-42KHz
IR Jack:------------------------3V to 15V any polarity, mod. or un-mod. (IR jack is opto-isolated)
12V Control:--------------------3V to 15V for on, less than 0.2V for off
Serial Port:--------------------9600 8N1, USB Serial Cable Compatible K.I.S.S.™ Protocol, Upgradable Firmware

Power:
Power Requirements:-------------5W Max, 3W Typ, 0.75W Standby
Mains Voltage:------------------100V-240V, 50Hz-60Hz, auto-sensing
Optional International:---------90V-264V, 47Hz-63Hz, (w/ adapters)
Power Supply:-------------------Wall Mount, 9V @ 1.2A, U.L. Listed
Dimensions:---------------------17"W x 6.5"D x 1.75"H

Warranty:-----------------------Two year parts & labor