The best solution for scaling and switching component and HDMI sources

The GefenTV Scaler Pro allows you to upscale and switch your standard definition or high definition component and HDMI sources to resolutions up to 1080p. Anything from set-top boxes, DVD players to the next generation of gaming consoles including the Xbox 360 and PS3 can be plugged into the GefenTV Scaler Pro.

The GefenTV Scaler Pro supports one component source with analog audio, one composite or S-video source with analog audio, and two HDMI sources with digital audio. The analog audio from the analog sources is digitized and outputted to the HDMI connection as well as the digital audio outs. The HDMI inputs also have separate digital audio inputs, so you can use DVI sources and separate digital audio and the GefenTV Scaler Pro will embed the digital audio into the HDMI output as well as the digital audio outs.

Easy to use on-screen menus accessible through the IR remote control allow for effortless setup and image adjustment to accommodate different viewing modes and screen sizes.

The GefenTV Scaler Pro supports these HDMI 1.3 Features:

•    Lip-Sync
•    Dolby TrueHD and DTS Master Audio
•    CEC Source Switching
•    12-bit color support / 10-bit color processing
•    XV Color Space support

Features:

•    True 10-bit programming
•    HDMI 1.3 12-bit color support / 10-bit color processing
•    SQ/HD HQV four-field de-interlacing
•    HQV multi-directional diagonal filtering
•    HQV 4D per pixel motion adaptive noise reduction
•    HQV detail enhancement
•    HQV cadence detection: 3:2, 2:2, 3:2:3:2:2, 5:5, 6:4, 8:7
•    HQV per-pixel video/film cadence detection
•    HQV adaptive scaling
•    eWARP2 Geometry Processing for use with projectors
•    Full HDMI 8-channel delay to match video processing
•    CEC source switching support
•    Supports HDMI 1.3 lip sync
•    Supports Dolby TrueHD and DTS Master Audio
•    XV Color Space Supported

Specifications:

•    Digital Video Amplifier Bandwidth: 225 MHz
•    Input DDC Signal: 5 Volts DC p-p (TTL)
•    Input Video Signal: 1.2 Volts p-p
•    Single-Link Range: 1080p / 1920x1200
•    Digital Video Connectors: 3 of HDMI type A, 19-pin female, 1 DVI-I female
•    Digital Audio Connectors: 3 of S/PDIF, 3 of TOSLink
•    Analog Video Connectors: 1 CS/SV/component
•    Analog Audio Connectors: 3 L/R RCA component / 1 mini-jack
•    Power Supply: 5 Volt DC
•    Power Consumption: 20 Watts (maximum)
•    Shipping Weight: 8 lbs.