Flexible 8-channel output SD Distribution Amplifier, simultaneously distributes Composite Video, S-Video (without adapters), and Audio pass-through

The KD-SCDA8 Distribution Amplifier simultaneously feeds your composite video, S-Video, and Audio signals from any source, to up to eight (8) or more composite video and S-Video destinations. Individual S-Video connectors are provided.

General:

•    Simultaneously distributes up to 8 channels of composite video (CV) and S-Video, with
      simple plug-and-play operation and convenient output Throughput feature
•    Left and Right analog stereo, or digital PCM audio distribution
•    Crystal-clear video, can drive CV (Composite Video) and S-Video cables,
      up to 300 feet each
•    Accepts NTSC, PAL, SECAM, and all world analog SD formats, 60 Hz and 50 Hz
•    Enables simultaneous signal distribution from any Composite Video (CV)
      or S-Video source:
•    Composite Video (CV)
•    S-Video
•    Analog (standard line-type Left & Right pairs) or digital PCM Audio
•    One unit can drive up to eight (8) independent devices:
•    Composite Video (CV) and S-Video
•    Output = Input
•    Throughput can be used as additional output, to bring the total to nine (9)
      output drives
•    Also has a Throughput output:
•    Can daisy-chain the analog video (Composite Video and S-Video) and analog
      or digital audio inputs to another device via the Throughput
•    Throughput can also serve as a ninth DA output
•    Cascadeable, so you can easily expand and future-proof your system
•    Stand-alone unit, or mountable with built-in flanges

Product Features:

•    Simultaneously distributes up to 8 channels of composite video (CV) and S-Video
      with simple plug-and-play operation
•    Crystal-clear video, with cable runs up to 300 feet long
•    Accepts NTSC, PAL, SECAM, and all world analog SD formats, 60 Hz and 50 Hz
•    Left and Right analog stereo, or digital PCM audio distribution
•    Cascadeable, so you can easily expand and future-proof your system
•    Stand-alone unit, or mountable with built-in flanges
•    Unit Weight: 2.8 lbs
•    Unit Width: 11.4 inches
•    Unit Height: 3 inches
•    Unit Depth: 2.4 inches

Inputs:
•    There is one (1) Input Group, consisting of Analog Video and Analog
       or Digital Audio Inputs:
•    1 x S-Video jack for S-Video analog video input
•    1 x RCA jack for Composite Video (CV) analog video input
•    2 x RCA jacks for audio input:
•    Standard line-type Left & Right analog pairs, or use one jack for digital PCM audio

Outputs:
•    There are eight (8) Output Groups, each Output Group consisting of discrete Analog
      Video and Analog or Digital Audio Outputs:
•    1 x S-Video jack for S-Video analog video DA output
•    1 x RCA jack for Composite Video (CV) analog video DA output
•    2 x RCA jacks for audio DA output:
•    Standard line-type Left & Right analog pairs, or use one jack for digital PCM audio
•    Output = Input
•    Can be cascaded to other KD-SCDA8 DA’s to drive as many outputs as desired
      from one source

Throughput:
•    There is one (1) Output Throughput:
•    1 x S-Video jack for S-Video analog video
•    1 x RCA jack for Composite Video (CV) analog video
•    2 x RCA jacks for audio:
•    Standard line-type Left & Right analog pairs, or use one jack for digital PCM audio
•    Power supply connector, to feed power to the daisychained units [NOTE: when
      daisy-chaining, you MUST use a 5 Volt, 5-Amp rated supply, available from Key Digital,
      as the external power supply for the first unit in the daisy chain]
•    The Throughput can be used as follows:
•    Can daisy-chain the input to another device via the Throughput
•    Throughput Output can also serve as a ninth DA outpu

Signal Properties:
•    Analog Video
•    NTSC, PAL, SECAM, all world analog SD formats
•    Composite Video (CV), and S-Video
•    Bandwidth flat out to 110 MHz
•    Audio
•    Bandwidth flat 20 Hz to 50 MHz
•    Analog (standard line-type Left & Right pairs), or
•    Digital PCM on Left or Right
•    Can drive CV (Composite Video) and S-Video cables, up to 300 feet each

Connectors:
•    Each Input (1 Input Group), Output (8 separate Output Groups), and Throughput
      (1 Output Throughput Group)consists of:
•    1 x S-Video jack for S-Video analog video input
•    1 x color-coded RCA female jack for Composite Video (CV) analog video input
•    2 x color-coded RCA female jacks for audio input:
•    Standard line-type Left & Right analog pairs, or use one jack for digital PCM audio
•    Other Connections:
•    Standard power plug for external power supply input and throughput
      power supply feed-forward output

Mechanical:
•    Easy to install and integrate - Custom Installer’s dream
•    Cables attach to the I/O A/V panel
•    Stand-alone or can be mounted with flanges (included)
•    Size: 3” x 11.375” x 2.375” high Weight: 2.8 lbs.
•    Enclosure type: Metal (no vents)
•    Input Power: 5 Volt DC (external supply included, 110-240V AC, 50-60 Hz, 1.0 A)

NOTE:
use a 5.0 A supply available from Key Digital, as the external power supply
when daisy chaining