RAM
Key Digital 1x12 Distribution Amp,  KD-CDA12P




Send HDTV Component Video and Audio, or RGBHV to 12 Displays or can be used as dual 1x6 Distribution Amps.
free shipping on All Key Digital Products!

KD-CDA12P is the perfect choice

for high-quality and economical video and audio signal distribution from any HDTV or SDTV component video source. It delivers color-rich, artifact-free, and pristine HDTV and SDTV images to component HDTV-ready monitors. KD-CDA12P is the ideal product for driving your HD and SD sources to video walls, plasma displays, front and rear projectors, and direct view monitors. Also configurable as two independent 1x6 Distribution Amplifiers, with each input driving an entire side of connectors on the front or the rear of the unit.

Features

•    12-channel component video distribution with simple plug-and-play operation
•    Crystal-clear video, with cable runs up to 300 feet long
•    Supports all HD and SD video formats, 60 Hz and 50 Hz
•    Supports Left and Right analog stereo, or digital PCM audio distribution
•    Cascadeable, so you can easily expand and future-proof your system
•    Added feature: distribute only composite video to as many as 34 composite
      video displays
•    Unit Weight: 3.5 lbs
•    Unit Width: 12.5 inches
•    Unit Height: 2 inches
•    Unit Depth: 5.5 inches
General:
12-channel component video distribution with simple plug-and-play operation, can drive up to 12 monitors or two independent sets of 6 monitors Crystal-clear video, with cable runs up to 300 feet long Supports all HD and SD video formats, 60 Hz and 50 Hz Supports Left and Right analog stereo, or digital PCM audio distribution Cascadeable, so you can easily expand and future-proof your system Added feature: distribute only composite video to as many as 34 composite video displays

Inputs:
One (1) Input group, each consisting of five (5) RCA connectors consisting of independent HDTV/SDTV Component Video (YPrPb) plus two channels of audio L&R:

Video:
Standard YPrPb (YCrCb) 1 volt p-p 75 Ohm terminated Component Video

Analog Audio:
Standard “line” type high impedance two-channel, Left & Right

Digital Audio:
Each L or R could be used for PCM digital audio

Outputs:
Twelve (12) Output groups, each consisting of five (5) RCA connectors consisting of independent HDTV/SDTV Component Video (YPrPb) plus two channels of audio L&R:

Video:
Standard YPrPb (YCrCb) 1 volt p-p 75 Ohm terminated Component Video

Analog Audio:
Standard “line” type high impedance two-channel, Left & Right

Digital Audio:
Each L or R could be used for PCM digital audio Can be configured for 3 modes: 1x12 terminated, 2x6 terminated, 1x12 loop through

Bandwidth:
Video bandwidth: - 3 dB @ 300 MHz
Cable Recommendation: Each run of YPrPb cable MUST be the same length(300’ max.)

Orientation/Mounting Information:
Cables attach to all 4 sides of the unit The unit may be oriented horizontally, or mounted vertically on a wall Use 2 #8 or M4 screws to hang the unit (keyhole slots are provided on the base of the unit)If installing into sheet-rock or hollow walls, provide proper screw support with bolts or sheet-rock anchors

Mechanical:

•   Size: 12-3/16” x 5-1/8” x 1-13/16”
•   Weight: 3.5 lbs.
•   Enclosure Type: Metal, and the top and bottom of the unit have no vents
•   Power: +/- 5V DC, 110-120 VAC, 60Hz (7 watts)
•   No other power adapter can be used with this unit