4x HDMI CAT5 Video Extender

The 4x HDMI CAT5 Extender allows you to transmit up to four HDMI video sources to independent remote HDMI displays. HDMI audio and video are replicated in perfect clarity at remote locations. Viewing locations can be up to 300 feet away from HDMI sources.

How it works
Simply connect up to four HDMI video sources to the 4x HDMI CAT5 Sender using the supplied 6-foot HDMI cables. Run CAT5 cables from the 4x HDMI CAT5 Sender unit to separate HDMI CAT5 MS Receivers up to 300 feet away. Connect each HDMI display to its HDMI CAT5 MS Receiver and you will see HDMI video in flawless replication at each remote location.

Note: For optimal performance, shielded CAT5e or CAT6 cable should be used.

The 4x HDMI CAT5 Extender system is HDCP compliant.

Features:

•    Easily distribute four HDMI sources to remote displays
•    Extends video up to 300 feet over CAT-5 network cables
•    Maintains 1920 x 1200, 1080p, and 2k resolution video

Specifications:

•    Video Amplifier Bandwidth: 165 MHz
•    Single Link Range: 2k/1080P/1920 x 1200
•    Input Video Signal: 1.2 volts p-p
•    Input DDC Signal: 5 volts p-p (TTL)
•    HDMI Connector: type A 19 pin female
•    Link Connector: RJ-45 Shielded
•    Receivers Power Supply: 5VDC
•    Transmitter Power Suppler: 24VDC

Package Includes:

•    1x 4x HDMI CAT5 Extender Sender
•    4x HDMI CAT5 MS Receivers
•    4x HDMI 6ft. Male to Male cable
•    4x 5VDC power supply (remote CAT5 MS Receivers)
•    1x 24VDC power supply (main CAT5 Sender)