Extend up to 4 sets of Component A/V -- up to 1000 feet!

The 1:4 Component/Audio over CAT5 Distribution Amplifier sends up to 4 identical sets of sparkling clear component video and associated audio up to 1080p at remote locations via four CAT5 cables -- at distances of up to 1000 feet. Now you can reliably and cleanly distribute up to four copies of a video signal and accompanying digital or analog audio to remote locations without having to worry about signal drop-off and loss of quality.

How it works

Simply plug in your component video and audio from your source to the 1:4 Component/Audio D.A. Sender. Your audio can be analog, SPDIF or TOSlink. Run your lengths of CAT5 cable from the Sender box through your building to up to 4 remote destinations. Connect each Receiver box to its CAT5 cable. Attach the Receivers to your displays, turn on all equipment, and you should see beautiful video extended and duplicated at up to four locations. All audio ports on the CAT5 Receiver will also be active, so even if your source only had analog audio your Component Audio Receiver will have digital and analog audio output.

Note: You will need 1 Component Audio Receiver for each remote location (Sold separately).

Features:

•    Supports up to 1080p component video
•    Supports analog L+R audio and multichannel digital TOSLink or S/PDIF
•    No Loss of Quality
•    Plug and play installation
•    Equalizations for different CAT-5 skews
•    One CAT-5 cable for extension

Specifications

•    Video Amplifier Bandwidth: 350 MHz
•    Input Video Signal: 1.2 Volts p-p
•    Input Sync Signal: 5 Volts p-p (TTL)
•    Horizontal Frequency Range: 15-70 KHz
•    Vertical Frequency Range: 30-170 Hz
•    Video In/Out: 3 RCA component
•    Audio In/Out: 2 RCA Audio, 1 SPDIF, 1 TOSlink
•    Link Connector: RJ-45 Shielded
•    Power Supply: 5V DC
•    Dimensions: 8.5"W x 1.6"H x 4.25"D

Package Includes:

•    One 5V DC Power Supply
•    One Component cable
•    One Users Manual