The ETS PV840 Extended Baseband Video Baluns allows you the freedom to use UTP instead of costly coax to transmit baseband video signals throughout your facility, with better signal characteristics, at a lower cost. Depending on your application, you may be able to utilize previously installed wiring, with a corresponding dramatic improvement in cost of installation.

Single, Dual and Quad baseband video baluns are available. Using the PV845, Quad Balun. You can transmit 4 distinct baseband video signals on a single run of Cat5 or better UTP, utilizing all four pairs in the cable. Since each pair has a carefully balance signal on it, you can run video in two directions on different pairs simultaneously.

The PV840 Series of baluns supports color video at distances in excess of 330 meters, depending on cable type. Black and white signals will typically be supported up to 750 meters.

Advantages

• ALL baseband video applications
• Security and Surveillance
• Video Terminals, Displays Features

• Use UTP for long distance signal transmission with superior performance and easy, low cost installation
• Greater stability with wider bandwidth (0 to 60 MHz)
• Rugged plastic cases • Made in USA. 100% QA.

Specifications
Bandwidth Flat to 60 MHz
Connectors BNC, F, or RCA (female or male) to RJ45 jack
Crosstalk >50dB
Media Category 5 or better
Dimensions 46mm x 25mm x 19mm
66mm x 66mm x 28mm (PV845, 846, 847)
Net Weight 0.02 kg (0.1 kg PV845)
840 Series Balun Models:
PV843 MBNC to RJ45 jack, pins 7, 8
PV844 EBVB - RCA jack to RJ45 jack, pins 4, 5
PV844B EBVB - RCA jack to RJ45 jack, pins 5, 4
PV845 Quad Video/EBVB (4) F-BNC to RJ45, all pairs used
PV960 Quad Video/EBVB (4) F-BNC to screw terminal, all pairs used
PV846 DVB (2) F-BNC to RJ45 jack, pins 5, 4 & 7, 8
PV847 Quad Video/EBVB (4) RCA to RJ45, all pairs used
PV848 EBVB - M-BNC to RJ45 jack pins 5, 4
PV849 EBVB - F-BNC to RJ45 jack, pins 5, 4
PV7003 EBVB - M-BNC to screw terminals
PV7004 EBVB - F-BNC to screw terminals
PV7008 EBVB -F Connector to screw terminal