Distribute a high Definition component video/digital audio source to a remote location over extended distances using economical CAT5 cable

*Note* This is a single piece to be used to either transmit or receive. Two are required for an installation


   •Uses standard CAT5 or CAT6 cable
   •Can be used with four composite video channels and mono analog audio
   •Four RCA connectors for component video and digital SPDIF audio
   •Heavy gauge steel, powder coated chassis, is corrosion and scratch resistant

Specifications:
Video
Nominal Input Level: 1 Volt peak to peak
Gain: N/A (passive)
Input Impedance: 75 Ohms, Unbalanced
Output Impedance: 100 Ohms, Balanced
Isolation port to port: >60 dB
Isolation out to Input: Bidirectional
Return loss: >15 dB
Video bandwidth: > 35 MHz

Audio (Digital and Analog)
1 Audio Channel Available: It may be used to transport a SPDIF digital audio signal or a mono analog audio signal (mono analog signal will be attenuated slightly due to lower impedance of the digital audio channel)
Distance
The adapter provides a minimum of signal loss and may be used for high definition distribution with cable lengths up to 200 feet typically with no monitor adjustment.
Composite Video picture quality is excellent in excess of 750 feet. When used in security applications, a monochrome picture will work in excess of 1500 feet.

Power
Requirement: No power required