NEW! The ETS AV900WP, AV901WP and AV906WP have been redesigned
with new flat circuit boards providing Baseband Video/Stereo Wall
Plates which are utilized for point-to-point replacement of
coaxial (video) and shielded (high impedance audio) cables with
UTP wiring, Category 5 or better.

The AV901WP (with 3 RCA jacks for all inputs) is designed for
installations that have a need for separate audio channels. For
example, some VCRs and Video Cameras have video plus stereo
outputs available on three RCA jacks. The AV901WP can run these
signals using three of the four pairs in standard UTP cable.
AV906WP (with 4 RCA jacks for all inputs) allows you to send two
channels each of baseband video and audio in any direction
desired. This capability yields, for instance, a bi-directional
video + mono audio link, or many other configurations.

You get the same high quality baluns with the addition of an enhanced
appearance of wall plates, giving you a more professional installation.

Decorator balun wall plates for a sleeker, cleaner professional
installation
• Easy installation with punch down blocks
• Ports are pre-labeled and easily identified
• 1 or 2 baseband video channel and 2 line level audio channels on one
run of Category 5 UTP
• Use for point to point replacement of coax and shielded cables
• Available in WHITE or IVORY

Specifications

Bandwidth
Flat to 60 MHz (video)
10Hz to 20kHz (audio)

Impedance
600:600 (audio)

Isolation
500 V (audio, per channel)

Dimensions
79mm x 123mm x 40mm

Common Mode
Rejection
>50dB (video)

Connectors
FBNC or RCA jack (video)+2 RCA jacks (audio) to 110 punch down type


AV900WP-X
Video + Stereo Audio (1) FBNC + (2) RCA jacks to 110 punch -down

AV901WP-X
Video + Stereo Audio, (3) RCA jack to 110 punch -down

AV906WP-X
Dual Video + Dual Audio , (4) RCA jack to 110 punch down