The ETS CAT5 A/V Broadcast System is a UTP Audio/Video Distribution
Hub (pictured above). It has baseband video with two channels of line-
level audio transmit through the distribution amplifier, creating 8
out- put sets (video + stereo audio) from a single source. The powered
AV608 can be cascaded twice (three tiers) yielding a total
distribution of 512 displays from a just one input source.
The AV600 System supports color video and stereo audio over a total
run length in excess of 330 meters (inclusive of all cable segments)
on Category 5 or better cable. Black and white signals will typically
be supported up to 750 meters.
• Run video and stereo audio signals over Cat5 wiring.
• Up to 512 outputs possible from a single source.
• For efficiency, the system balances the input signal, distributes on
UTP, and converts back at each display.
• Complete system design flexibility, with components that can be
100’s of feet apart.
• Low power requirements for the Hubs, display baluns need no external
power.
• Made in USA. 100% QA.
Bandwidth Flat to 60 MHz (video) / 10Hz to 20kHz (audio)
Connectors BNC or RCA (video) / (2) RCA (audio) to RJ45
(pairs 2, 3 & 4 - Cat5)
Crosstalk >50dB (video)
Impedance 600:600 (audio)
Isolation Audio: 500 V (per channel)
Power In 9-12 VAC, 800mA min. with supplied Adapter.
Dimensions AV608: 260 x 165 x 32 mm (10.3 x 6.5 x 1.3 in)
AV602/603: 140 x 85 x 40 mm (5.5 x 3.4 x 1.6 in)
Net Weight AV608: 1.5 kg (3.4#) AV602/603: 0.2 kg (0.4#)
Product Ordering Information
AV602 Isolated Video/Audio Source, (1) FBNC + (2) RCA
Jack to RJ45 Jack, pins 1,2,3,6,7&8
AV603 Isolated Video/Audio Source,(3) RCA Jack to RJ45
Jack, pins 1,2,3,6,7&8
AV608 UTP Audio/Video Distribution Hub, 8 Channel
