NEW! The ETS AV902WP S-Video/Stereo Audio Baluns have been
designed with a new flat circuit boards and decorator wall plates
with pre-labeled ports allowing for easy identification and giving
neater complementary professional appearing installations.
The AV902WP adapts Category 5 or better premise wiring for use with
Super-VHS, Hi-8 and other “Y/C” format, high quality video
signals. The AV902WP uses the industry standard 4 pin mini-DIN
connector for video, and RCA jacks for the two audio channels.
This arrangement complements the connectors on most high-end
consumer and Y/C format professional video devices.
The AV902WP is a passive (non-powered) device. It is bi-directional,
in the sense that identical baluns are used on transmit and
receive ends of the run of UTP. Used in pairs to adapt both ends
of a run of Category 5 or better cable, the result is clean,
transparent video and audio transmitted over distances in excess
of 300 meters
Applications:
• Home Theater
• Classrooms
• Auditoriums
• High Resolution Remote Monitors
• Security & Surveillance
• Consumer Video Equipment
• Video Projection Systems
Bandwidth
Flat to 60 MHz (video)
10Hz to 20kHz (audio)
Impedance
600:600 (audio)
Isolation
500 V (audio, per channel)
Dimensions
79mm x 123mm x 40mm
Common Mode
Rejection
>50dB (video)
Connectors
FBNC or RCA jack (video)+2 RCA jacks (audio) to 110 punch down type
AV900WP-X
Video + Stereo Audio (1) FBNC + (2) RCA jacks to 110 punch -down
AV901WP-X
Video + Stereo Audio, (3) RCA jack to 110 punch -down
AV906WP-X
Dual Video + Dual Audio , (4) RCA jack to 110 punch down
