The ETS AV902 S-Video/Stereo Audio Balun adapts Category 5 or
better premise wiring for use with Super-VHS, Hi-8 and other “Y/C”
format, high quality video signals. The AV902 uses the industry
standard 4 pin mini-DIN connector for video, and RCA jacks for the
two audio channels. This arrangement complements the connectors on
most high-end consumer and Y/C format professional video devices.

The AV902 is a passive (non-powered) device. It is bi-directional, in
the sense that identical baluns are used on transmit and receive
ends of the run of UTP. Used in pairs to adapt both ends of a run
of Category 5 or better cable, the result is clean, transparent
video and audio transmitted over distances in excess of 300 meters

Features:
• S-Video (Y/C baseband) channel and 2 audio channels on one run of UTP
• Use for point to point replacement of coax and shielded cables
• Rugged plastic cases
• Made in USA. 100% QA

Applications:
• Home Theater
• High Resolution Remote Monitors
• “Prosumer” Video Equipment
• Video Projection Systems

Bandwidth 	Flat to 60 MHz (video) / 10Hz to 20kHz (audio) 
Connectors 	FBNC or RCA jack (video) / (2) RCA jack (audio) or screw terminals (audio) to RJ45 jack 
Crosstalk 	>50dB (video) 
Impedance 	600:600 (audio) 
Isolation 	500 V (audio, per channel)

Product Ordering Information AV900 VSB, (1) FBNC video pins 8,7 + (2) RCA jack Audio to RJ45 jack, pins 1,2 & 3,6
AV900S VSB, (1) FBNC video pins 8,7 + Screw terminals Audio to RJ45 jack, pins 1,2 & 3,6
AV901 VSB, (3) RCA jack, Video, pins 8,7 + (2) Audio to RJ45 jack, pins 1,2 & 3,6
AV905 DVDA, (2) FBNC Video pins 1,2 * 7,8 + (2) RCA jack Audio to RJ45, pins 3,6 & 5,4
AV906 DVDA, (2) RCA jack Video pins 1,2 & 7,8 + (2) RCA jack Audio to RJ45 jack, pins 3,6 & 54