The ETS CAT5 A/V Broadcast System is a UTP Audio/Video Distribution Hub (pictured above). It has baseband video with two channels of line- level audio transmit through the distribution amplifier, creating 8 out- put sets (video + stereo audio) from a single source. The powered AV608 can be cascaded twice (three tiers) yielding a total distribution of 512 displays from a just one input source.

The AV600 System supports color video and stereo audio over a total run length in excess of 330 meters (inclusive of all cable segments) on Category 5 or better cable. Black and white signals will typically be supported up to 750 meters.

• Run video and stereo audio signals over Cat5 wiring.
• Up to 512 outputs possible from a single source.
• For efficiency, the system balances the input signal, distributes on 
UTP, and converts back at each display.
• Complete system design flexibility, with components that can be 
100’s of feet apart.
• Low power requirements for the Hubs, display baluns need no external 
power.
• Made in USA. 100% QA.

Bandwidth 	Flat to 60 MHz (video) / 10Hz to 20kHz (audio) 
Connectors 	BNC or RCA (video) / (2) RCA (audio) to RJ45 
 	        (pairs 2, 3 & 4 - Cat5) 
Crosstalk 	>50dB (video) 
Impedance 	600:600 (audio) 
Isolation 	Audio: 500 V (per channel) 
Power In 	9-12 VAC, 800mA min. with supplied Adapter. 
Dimensions 	AV608: 260 x 165 x 32 mm (10.3 x 6.5 x 1.3 in) 
                AV602/603: 140 x 85 x 40 mm (5.5 x 3.4 x 1.6 in) 
Net Weight 	AV608: 1.5 kg (3.4#) AV602/603: 0.2 kg (0.4#)

Product Ordering Information 
AV602 	Isolated Video/Audio Source, (1) FBNC + (2) RCA 
 	Jack to RJ45 Jack, pins 1,2,3,6,7&8 
AV603 	Isolated Video/Audio Source,(3) RCA Jack to RJ45
 	Jack, pins 1,2,3,6,7&8 
AV608 	UTP Audio/Video Distribution Hub, 8 Channel