Filter Search

Under 25 (24)
Calrad Electronics (22)
CBI (1)
Planet Waves (1)
Blue Microphones (1)
1 (1)

Security Seal

XLR Adapters

XLR Adapters - Connect XLR Jacks and Plugs to RCA, 1/4", 3.5mm, 1/8" Connectors and Cables, common audio connectors for PA and recording
Standard Wiring for a XLR is Pin 3 is negative or "cold", pin 2 is positive or "hot", and pin 3 is ground. So a standard XLR to mono 3.5mm or 1/4" jack is XLR pin 2 to the Tip of the 1/4" or 3.5mm connector, and pin 1 and 3 to the sleeve. If the 1/4" or 3.5mm is a stereo connector it gets more interesting. If the connection to the 1/4" or 3.5 is mono, then only the tip and sleeve will make contact. If the device uses tip, ring and sleeve, then you really need a pinout to figure out how you want to wire it up. 

Sort
products / page
Calrad Electronics

3.5mm stereo female jack to XLR female. Wire pin 1= ground, pin 2= tip & ring. 8 inches long. Black PVC jacket.

Calrad Electronics
$7.65
Qty:
Calrad Electronics

3.5mm stereo female jack to XLR male. Wired pin 1=ground, pin 2=tip & pin 3=ground. 8 inches long. Black PVC jacket.

Calrad Electronics
$7.65
Qty:
Calrad Electronics

phase Adapter, 3 pin XLR female jack to 3 pin XLR male plug.Crossing wire for pins 2 & 3.

Calrad Electronics
$8.55
Qty:
Calrad Electronics

3 pin XLR male plug to female RCA type jack

Calrad Electronics
$5.91
Qty:
Calrad Electronics

3 pin XLR male plug to 1/4" stereo jack.

Calrad Electronics
$8.55
Qty:

Male XLR to Dual Female XLR. Length 1 Foot.

CBI
Starting as low as $22.38
Calrad Electronics

Mic Adapter for high/low impedance. Dual impedance Line matching Transformer. Comes with high/low switch built in, switchable between 600 ohms 50k ohm output, with 600 ohm input.

Calrad Electronics
$24.70
Qty:
1 2 3