• Extend your audio/visual experience up to 330ft(100m) over CAT5e/6/7 cables. This HDBaseT based technology allows you to send IR, RS-232, video (up to 1080p or 1920x1200) and audio (all Lossy and Lossless formats) signals over a single CAT5e/6/7 cable.

Bidirectional Control

• Compatible with all 3rd party controllers and IR remote controls, get bidirectional control from the RS-232 and IR ports. Control the matrix and the in zone displays with RS-232 or control all connected devices with the new zone dedicated IR ports.

No Device Left Behind

• Ensure that even the most difficult display can receive audio and video with 8 programmable memory presets loadable to any source connected to the matrix.

Back Up Power Supply

• In the event the main power supply becomes inoperable the built in redundant power supply will seamlessly take over the matrix’s energy needs.

• Bandwidth Frequency: 6.75Gbps
• Input ports: 8 x HDMI (Female Type), 9 x IR 3.5mm mono, 1 x Firmware update, 8 x 3.5mm Stereo Audio
• Output ports: 8 x CAT 5e/6/7, 1 x RS-232, 9 x IR 3.5mm mono
• Resolution outputs: Video: up to 1080p Vesa: up to 1920x1200
• Dimensions (HxWxD): 6.93x18.98x14.27 (inch) or 176x482x362.5 (mm)
• Weight: 21.61lbs or 9.8 kg

Package Contents

• 1 x 8x8 Matrix Switcher over CAT5e/6/7
• 9 x IR Extender
• 9 x IR Emitter
• 2 x 24V/6.25A DC adaptor
• 2 x Power Cord
• 1 x Remote Control
• 1 x User Manual

Warranty

• 3 years

AT-PRO2HD88M Firmware

Update 1.1.19 Includes:

• Fixed RS-232 buffere size for multiple commands. (up to 50 characters will pass)
• Fixed minor RS-232 error
• Fixed minor EDID error
• Fixed switching error causing HDCP snow. Black or blue screen will show while switching.

Firmware version 1.1.16

• Added new RS-232 power status command "PWSTA"
  • Feedback when power is on: "PWON"
  • Feedback when power is off: "PWOFF"
• Fixed RS-232 feedback errors
• Fixed HDCP snow when switching

Firmware version 1.1.14

• Ability to turn the IR on and OFF by the Front Panel
  • Press "Function" then "7" to toggle IR on and off
• Support for new IR HEX commands for Power On and Power Off
• New IR control Feature
  • New ability to turn the IR on and OFF
  • RS-232 Command --> "IRON" turns IR on
  • RS-232 Command --> "IROFF" turns IR off

Firmware version 1.1.02

• Full ASCII code-set zone passthrough supported

AT-PRO2HD88M Control Drivers

Control4