The Atlona 10 Input Scaler and Switcher with a Single HDMI Output allows four HDMI or DVI, three VGA, one component, one S-Video and one composite video input to be scaled to a single HDMI output. The on screen display gives you the ability to change audio, scaling, and resolution options. With additional functions such as RS-232 and IR control the AT-LINE-PRO4 is easier than ever to control or integrate with a preexisting system.

Multi-audio options

• Embed audio from a DVI source to HDMI or de-embed audio from any of the connected devices to an amp. The AT-LINE-PRO4 passes through any analog or digital 2Ch audio signal to ensure the best presentation available.

Built in scaler

• With multiple inputs it can be hard to get them all to display right, but the built in scaler takes away the hassle. Just choose your output resolution from 640x480 to 1920x1200 or 480i to 1080p and all your inputs will be scaled to the correct resolution.

Multiple Inputs

• Connect a wide variety of devices with 4 HDMI, 3 VGA, 1 Component, 1 composite, and one S-Video inputs built in. Use DVD players, computers, cameras, and many other devices in your presentations without the need to disconnect anything.

Atlona AT-LINE-PRO4-GEN2

• TMDS Clock Frequency: 225Mbps
• Input Ports: 4 x HDMI, 7 x 3.5mm stereo audio, 3 x VGA, 1 x S-Video, 1 x Component Video, 1 x Composite Video
• Output Ports: 1 x HDMI, 1 x 3.5mm stereo audio
• Resolution outputs: Video: up to 1080p @ 60Hz Vesa: up to 1920x1200
• Dimensions (WxDxH): 17.16x6.57x1.92 (inch) or 436x67x49 (mm)
• Weight: 4.6lbs or 2.1kg

Package Contents

• AT-LINE-PRO4
• 5V/3A DC power supply (110/240V)
• IR Remote Control
• Rack Ears
• User manual

Warranty

• 3 year

AT-LINE-PRO4-GEN2 Control Drivers

Control 4

RTI

AT-LINE-PRO4-GEN2 Firmware

Update Includes:

• Fixed power cycling issue when using extenders
• Fixed green line at bottom of screen when TV is set to JUST SCAN aspect-ratio mode.
• Fixed audio noise when switching the input from VGA to HDMI.

Update Includes:

• Added color bar options: On (stays on for 15 minutes with no signal), Off, and Always On
• Added on screen display option: Follow Input (scaling option)
• Added on screen display option to adjust volume: 0-41
• Added new RS-232 command to change analog audio volume.
  • S AAUD 0 ~ For Muting
  • S AAUD X ~ For volume level, replace X with 1 - 41

AT-LINE-PRO4-GEN2 Updating Software